C'est humorisitque quand je dit que c'est pas surprenant que le contrôleur ai cramé, en fait jai plus mal pour le chassis que pour le controleur. :)

okay !!
tu parle francais mister T ??
dou you spike french mister T ??

I got my new V2 MMM in the mail today...Yah Mamba Stickers!:yipi:

I think I will have to put it to the test with my Plettenberg Big Maxximum.

Now that will be a nice setup to torture test the MMM with...

Oui, normal je suis Français :P

Don't buy it as they could do something very simple - like trim 1 corner fin by 2mm...

I am with you on that. No reason a distinguishing mark or other couldn't be used to identify the V1 failures.

Your right, they are still good ESC's and I would have no problem owning one.

well arent there different, more expensive parts in the V2, couldnt they tell by that alone

Got my second MMM today and it works Great!!!!!!!!!!!!!!!!!!!!!!!!!!!! Thanks Patrick

Its an awful waste of resource, not to mention that it can be recycled. I mean if their concern is false claim of warranty, removing BEC parts would be a distinguishing mark. I would mine owning 1 of the working V1's as well...

without that extra heatsinking it might require a fan! :O

No gripes here just a very satisfied MMM V2 owner.This is my newest project a Cen Matrix Pro with the Monster Mamba Max Neu/1512/1.5D/F 3s 6000.Its freakin realy fast.I also want to thank Mike from RCM for the help with the battery tray and ofcourse the sweet machined motormount.:diablo::whip:

http://img387.imageshack.us/img387/3...4209ok0.th.jpg
http://img151.imageshack.us/img151/6...4210ff7.th.jpg
http://img387.imageshack.us/img387/7...4206tm4.th.jpg

Nice ride...good to hear about your V2....

Maybe you can make a new thread and post some vids..... :party:

What version of Castle Link do we use for the V2? Because 3.10 does not see the ESC.

Castlelink V3.051 with Windows XP

Ok, 3.051 just won't let you update the firmware but I'm sure that does'nt need to be done anyway yet.

IIRC there was someone who spoke to CC that the V2 have a newer firmware that they havent released yet on the CC link. So you're right not needed now :)

3.051 and 3.10 work fine with V2, Im using 3.10 on XP and Vista, its same as 3.051 think its only different for a plane or boat, just window pops up, "cannot update firmware on this controller" which castle said was MMMv2 has higher firmware then 3.10 for the fan and will be on next firmware update

I still haven't received an e-mail saying that my MMMv2 has been shipped.

The sidewinder and 4600 that I ordered months ago from a retailer and was supposedly shipped over a month ago by express post still hasn't turned up either :no:.

I can't stand all this waiting but while I am having a whinge I would also like to abuse summer for taking so bloody long to get here. I can't drive my cars in the dark you know :diablo:.

Where abouts did you buy that sidewinder combo from? :)

I'd rather not mention at least until I get it :whistle:. It wasn't from mike though.

I'm hoping to receive mine next week since it takes 6-9 days for packages to egt to Japan through the military postal system. I received the email and tracking number yesterday though Joe Ford told me about this last Thursday. CC is also sending some banners we can put up on our home-made track inside the military base.

That's all well and good BUT IT'S OF NO COMFORT TO ME!!! ME ME ME ME ME.


:wink:

You want summer to get here? where in oz are you? I hate running my electrics in our 40C summers, much prefer the 10C of winter - just seems like the cool is nicer on the electronics :P

And I think theres something whacky going on with the post, I'm suddenly receiving a bunch of parcels I was worried about and have been waiting over a month for. If you have express dont you get a tracking number?

You would think so BUT THEY NEVER GAVE IT TO ME. Personally I don't think they have sent it yet or at least didn't send it when they said they did. I have dealt with the retailer multiple times before and I have no doubt I will get the sidewinder it just takes time.

It's freezing here. I'm in the ACT and it's way too cold. Summer isn't a problem for me I love the heat but keeping the electrics cool when the tar they are running on is +50c (122f) is a bit of a challenge. You chew up tires really quick on hot tar too. My main complaint about winter is that it is dark by the time I get home. I have been getting up earlier in the morning so I can take the dog for a walk in the morning when there is some daylight. I also work in an office with no natural light so daylight is precious. Plus riding to and from work in the cold and dark isn't as much fun as it sounds either.

Oh yeah, baby! Got my incoming delivery from CC email. :rules::yipi:
edit: oh, I mean, billing info rec'd by UPS email. Still stoaked, though. :D

Any information when those controllers are available ? Looks like many of rc-monster members have MMM controllers allready in here rc-monster forums...

My v2 is going on hour 7 of use now. It has never got warm enough to get the fan going. 121 esc, motor 150, batteries 105, air temp 93 are the hottest i have seen. converted revo, 17/38 pinion/spur, wide ratio tranny.

I put an hour of total track time on my v2 today with 5S in a buggy & it ran perfect but the fan did stop (I think). I have not checked it out yet.

Anyone know how many V1's are still out there?

My buddy runs one in his e-maxx and has since I had mine that failed.

Just ordered my MMM from BPP, for less then 150 shipped, on the new firmware will we be able to change the temp that the fan comes on?

I'm still running a V1 without any problems. Keeping my fingers crossed!

BPP put their prices up, esc from 170 (i think) to 180, combo price from 270 up to 308 :( damnit why did I keep putting off that backorder...

What firmware did the V1 come out with? I still haven't updated my V1, only just changed the settings

im still using a v1 on 4s

My V1 has a few hours on it with 4s lipo and a 1515 1.5d, and no issues so far.

I did clearance the bottom of the case so that the fan plug did not rest on it. I also enlarged the opening that the signal and switch wires exit thru. And I added some high density foam underneath the main pcb to support it. That way the board could not knock against the bottom cover during a hard landing. My fan still works too.

i did that on both of my v1 and still going stong:party:

Got my MMM v2 today so now I´m a happy man

Going to try it out on thursday

You got it today, but arent trying it until thursday??!!

Your only excuse is if your in hospital on life support! and even then, only if your in a hospital thats so crowded and mean that if you go blasting your rc vehicle around the room theyll pull said life support! Get out and a try it now man!