I can hook you up. I've got a 12" extension I originally got for my Savage... Shoot me your address.

Thanks metallover, and a pm has been sent your way....

Servo extension sent to sjcrss!:party:

Thanks, it is appreciated....

I've been contimplating asking anyone if they have an old hard drive for my dell POS 4300. I got it up to a decent operating speed (THANKS GEE!), but now I realized I'm starting to push the limits of my 19gb hard drive. Does anyone have an old hard drive with some memory storage capabilities without any viruses or child porn?

I also can offer up one stick of 256mb ram. Sorry I don't have anything RC related to offer up at the moment...

If anyone has a useable GTP body it would be much appreaciated.Down to 4 days a week due to layoffs so its tight here.

What type DDR / PC133? I might have something.

-Jon

Just realized you had the mem and not needing it.:oops:

-Jon

Does anyone have an RCM Jammin CR Buggy motor mount they would be willing to let go for a trade or cheap? I have some Blade CX2 MaxAmps lipos I would be willing to trade for the mount.

Ping mike he had some seconds...

Does he have a CX2 (or 18T) and would he want to trade?

I would consider a trade of my Blade MCX.

For what, I don't know...

Would like to say thank you to magman for the Kimbrough spur gear! Just got it in the mail today! Thanks man!

Thanks Metallover, I received the servo ext. today, and it works great....thanks again...

You are most welcome!:mdr:

I for got mention the other day...I have a stock 72 tooth Robinson Racing t-maxx spur gear if anyone wants it in excellent condition

I can get you a brandnew IDE harddrive if that is what you are looking for.

I have nothing RC related to offer as well. Just computer parts, pda's, video cards...well you get the idea.

Would anyone happen to have some one way bearings layin around? I need them for my truggy's roto start....

One that looks like this - http://www3.towerhobbies.com/cgi-bin...?&I=LXDLN7&P=7

I have a custom made tire caddy That i dont need anymore . It will hold 8 sets of 23mm mt tires . It is balck in color & the top has a handle & locks to the lower portion . So you can carry it anywere you want . It looks very nice . This is great for keeping your tires organized & in one place . All im asking is for you to pay shipping If you are interested please pm me . Thank's

http://skellyo.com/hippie/Tire%20Car...ics3%20133.jpg

http://skellyo.com/hippie/Tire%20Car...ics3%20134.jpg

http://skellyo.com/hippie/Tire%20Car...ics3%20135.jpg[/QUOTE]

ill be going through my rc room more next week so there should be alot of other things for this thread only time will tell.

if you want it you pay shipping i ship usps priority flat rate envelope for small things and for larger things i will weigh it out and get you a shipping quote

i have
venom 6 cell 3000 mah stick pack with deans connector
a bag of old rims for 1/8 buggy most rims are useable they just need to be cleaned up

Anyone got any Rustler spurs?
I already broke off liek 8 teeth with my sw combo

I have a stock Evader EXT spurs.

Yes i have an 86t one

I got some extra shrink wrap if anyone needs a little. I have some extra 5mm, 3mm, and a little 2mm.

If anyone has an old heat gun or even a hair dryer that would get hot enough to melt large peices of shrink wrap to goes over batteries let me know. I just use a lighter for the smaller stuff...

Also on my list is micro t shocks (stock is fine) and 10th scale wheels.

I also have a set of maxx wheels and 14mm hexes if anyone needs those. Harold I can send them back to you if you want.

ygpm Metallover

hey fellows looking for some buggy wheels and tires? 17mm anyone? lmk
phil

ive got a 32p 18t pinion that came with my MMM that i dont need...
brand new
hit me up if you need it

pm'd you DF. also im looking for any 5mm bore pinions (19T and 24T mainly) that will fit in an e-maxx with stock spur because thats all i need to get my maxx running. willing to pay shipping. -Wes

i got you and one other that emailed me earlier today that want it, so its basically gone for everyone else lol

Hats off to.
 

Hats off to Anson. We just received a box from Anson in the land down under. After hooking up on this thread we exchanged a couple of emails about my quest to have my kids all build stock E-Maxx trucks in an attempt to teach them something. Well he came through in a big way by sending us a 15lb box of 3905 & 3906 stock parts. In fact there is nearly enough stuff here to build two complete trucks. I am eternally grateful for your generosity Sir. Soon my whole family (5 of us) will be out tearing up the landscape bashing with our Maxx trucks. 2009, what a year???

jerry, want a set of stock maxx arms? im looking for some 2.5 driveshafts... also have a slew of rc18 parts

I have an original emaxx equipped with spools front and rear as well as MIP cvd's. This truck is without electronics, but i can include an EVX2/titans as well as Traxxas 3 channel radio/receiver if needed. This truck has been somewhat of a "donor" vehicle, so some of the small pieces are missing or in use on another vehicle, I also have the proline servo saver kit for this truck.

Im open to trades, tell me what you got!

ygpm shizz!!!! man i want an emaxx.... lol, jerry ur makin me jealous!!!

Sure.
 

We will take whatever old Maxx stuff you have for the family Maxx builds. We have two stock trucks now up and running so far. I just received a box with enough to build another one for our daughter, and we still plan for the wife to build one as well. I am enjoying teaching them to build these on their own. What a great way for them to learn about our hobby, and good one on one time for each of them. Just let me know.

I'll see if i can round anything else up...I'm new to this maxx stuff too tho...

Info.
 

I know there are a few people watching over this thread and since this is a Pay it Forward thread why not mention what we are doing along this line. In case some of you have missed out on another project that we are doing please take a peak in the Project-X group for the thread with the gooses and the golden egg post. We are trying to pay it forward in a big way, and can use some help if you are willing. This thread is what pay it forward is really all about. No strings attached, or obligation just for looking. This is for a good cause, so please check it out and see how you can help in the way that the RCM gang has always helped. Thanks guys.

Yup, it's a good cause for a good guy we all have gotten info/laughs/opinions from on this forum. We're pretty close to getting a standard notebook, but let's give him a lil' extra, eh?

Anyone have a body for a Jammin X1-CRT they would be willing to part with? New or used, painted or clear, I don't mind, as long as it's the stock Jammin X1-CRT / Mutilator body. So anyone have one?

I'm still needing two 12mm hexes if anyone has a couple.

does anyone have any hyper 7 elc converson parts for cheap??

motor mount, batt box, bec, pinion?

the motor mount from the hyper 8 will fit too...

I plan on useing a novak 4.5 on a 4s with a tekin RS pro esc...