Wow, that will be insane.

We will see how much power it will have:lol:

There comes too a Savöx ESC, i'm very interested in that one.

Greetz,
Joram

If it was me, I would just get a MMM.

Why that, someone who tests BL set-ups for Fioroni has given them tips what specs the ESC needs!

So i don't have any reasons why not buy one:)

Greetz,
Joram

The MMM is superb yes, but thats not a reason to test other escs and motors, how else can the industry progress without trying and testing new things?

I kinda like the design of the motors, very clean and smooth looking in nice colors.

That's exactly why i'm going to use Savöx products. I heard all good news from the servo's so i guess the motors/ESC's are from the same quality!

This is the 1:10 ESC: http://www.savoxservos.nl/?p=946

I can't wait to see the 1:8 version:intello:

Greetz,
Joram

Update!!!!

My spoilermount arrived, finally i have something nice to mount my spoiler :lol:

I have also modded my piston holes from my LST shocks, i have drilled them to bigger holes. Standard are there tiny holes wich don't perform very good. The shocks didn't worked properly and smooth, now they are perfect 8)

http://img23.imageshack.us/img23/7645/img1076dq7.jpg

http://img440.imageshack.us/img440/8020/img1077qs5.jpg

http://img23.imageshack.us/img23/156/img1081me7.jpg

http://img23.imageshack.us/img23/9914/img1082dm3.jpg

http://img23.imageshack.us/img23/1959/img1083dg7.jpg

http://img440.imageshack.us/img440/5710/img1084fm1.jpg

Tommorow my servo will arrive:)

Greetz,
Joram

Looking goooood...very nice indeed! :great:

Incidentally (and correct me if I'm wrong)...but is that copper-plated PCB etching board that you've used for that wing mount? I used to use it for some of my old projects, and it's tough stuff. Basically fibreglass.

All what i know is that it is made from Epoxy. Think it is that PCB etching board:yes:

Here a overview:intello:

http://img87.imageshack.us/img87/74/img1085sp0.jpg

http://img87.imageshack.us/img87/1087/img1086ax6.jpg

http://img444.imageshack.us/img444/3015/img1087ka0.jpg

http://img444.imageshack.us/img444/9291/img1088rz6.jpg

Greetz,
Joram

Dude, nice. I like that you can alter the height of the spoiler to suit the shell etc.

I like the pic showing the rear, ALOT!

Well, my Savöx 4570, 2000kv is ordered!!!!

Servo has an delay, was sold out:whip:
My cen diff's are tomorrow shipped, so the hole driveline is perfect:intello:
In about 2 weeks i order some flux gears for the tranny, and some other small stuff.

Now a question about alu bulks: the FLM ones or the Golden Horizon??

Golden horizon just came this month with these bulks, they are savage X!! version.

These also open different, i think it is way better then the flm ones, they open very irritating...
You can now open them by the ball-bearings, you need to open the flm ones at the front/rear.

http://www.ghhobby.com/proddetail.php?prod=2618


EDIT: my epoxy brakes arrived:
http://img10.imageshack.us/img10/7097/img1089tp7.jpg

Greetz,
Joram

I dont think Im qualified to say, but the GH bulks seem just as nice as the FLM ones, and if they are easier to open up for maintainance.. why not eh?

I'm going to order the FLm ones, they just look so damn nice:intello:

About some towers, wich one are the best, FLM, Nova, innovatice rc?(those ones are not in stock, what's about that?)

Greetz,
Joram

I personally like the FLM towers. I haven't had experience with that specific part, but I have a lot of experience with a number of other FLM parts, and can't say enough good things about them from the quality, to its durability, to their warranty. :wink: