yep. Its still a bit undergeared though, might have to try a 20t pinion.

10l's can take that kind of gearing?, Im running 20/66 on my 7xl and it seems just about fine.

I guess we'll find out when he's buying another motor. :035:


Personally I think it's a little high also but if the temps are good, its ok.

It is high, but the batteries and 9920 arent even warm, the motor get the hottest. Gonna have to try some 16 cell packs soon. 14 is already a bit.

Any ways on loosing some more weight? :)

I have NIP flextek suspension for Revo,PM me if you know anyone that wants it.

Cates - sent you a pm

Got back from some more bashing today, and broke 2 things! I broke a left upper a-arm in half and snapped a drive shaft. I took off all the arms and replaced them with some RPM arms, after replacing , no problems. Tomorrow i will be making a custom controller mount out of blue nylon to match my blue arms. I will put up pics soon, had some fun times bashing with a nitro mt;)

hey sylvester. i will be interested i nthat controller holder if you wwanna make another.

2 pics of the damage from the crash. I hit a brick wall at about 25-30mph

Some pics of the truck:)

My controller mount is made of a solid blue nylon block, it has a little reamed hole so the wires go through it. I like its colour cause it matches the blue rpm arms. Toby, pm me if you like this controller mount.

Forgot pics**

I really like this mount because it weighs next to nothing, is rigidy , and can mount the ubec and 9920 on seperate sides, i got lucky i found this nylon block, especially in blue. Luckily, i have 1 or 2 more of these blocks, but they have no drilled holes.

sylvester, why arent you running the foam pads on the chassis?

i took them off , they ripped, and they got soo much dirt under them.