RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Castle Creations (https://www.rc-monster.com/forum/forumdisplay.php?f=34)
-   -   Castle 5th scale (https://www.rc-monster.com/forum/showthread.php?t=28405)

brushlessboy16 12.03.2010 07:27 PM

Quote:

Originally Posted by Pdelcast (Post 389316)
HV ICE uses Infineon BSC031N06 (3.1 milliohm, 60V)
Mamba XL uses Infineon BSC019N04 (1.9 milliohm, 40V)

You'll be waiting a long time (forever) for TO-220 or TO-247 based controllers from Castle... They switch like crap -- too much package inductance.

There are much better MOSFET packages coming. TO-220 and TO-247 were designed in the 1970s, and just don't handle high dV/dT well.

Thanks for setting me strait on that one, my mentality was the bigger the better :)

Im going to shoot you a pm patrick.

_paralyzed_ 12.04.2010 01:59 AM

Quote:

Originally Posted by Arct1k (Post 389257)
The esc is honestly a beast. Hard repeated braking of a 25lb+ car on 8s did not make it break sweat. Whilst the conversions support it I'll stick with esc brakes.

Ps the xl almost seems to have abs braking.

Quote:

Originally Posted by Pdelcast (Post 389276)
No sweat at all. The controller will handle hard core bashing without issues -- just be sure to check the data logs and make sure you aren't running too hot.

Well, Arct1k and Pdelcast both just put in writing that this setup will handle bashing. I AM SOLD

esc brakes will make my conversion cheaper and simpler. You guys will see my e5b soon.

Until then look back at my $4000 gas 5b http://rc-monster.com/forum/showthre...ight=5b+thread

_paralyzed_ 12.12.2010 04:35 AM

I've got cash in hand. Where do I buy a 5b kit? Also an extra omgwtfbbq esc?

I need 2 esc's a motor and a conversion kit. NOW! How? Where?

Thanks:intello:

Cody.McP 12.12.2010 05:11 AM

Quote:

Originally Posted by _paralyzed_ (Post 390194)
I've got cash in hand. Where do I buy a 5b kit? Also an extra omgwtfbbq esc?

I need 2 esc's a motor and a conversion kit. NOW! How? Where?

Thanks:intello:

Haha, I'm right there with you Harold. Once these are released I'm going to be having at least 2 sets coming to my door. Really can't wait. :party:

DrKnow65 12.12.2010 03:10 PM

Waiting as well... even bought a pair of 4s lipo's (ran in paralell now on a MMM, will go series when the XL finally shows).

lincpimp 12.12.2010 04:05 PM

I would use the esc brakes for the rear, and a set of mech brakes for the front. Use a radio like the m11 that has a dedicated throttle slave channel to mix the front brakes and you are good to go. Front wheels do 60+% of the braking anyways, and I always disliked the stability issues that rear only brakes cause during hard stops.

Good to hear the omgwtfbbq esc can handle 8s with braking, but I would have really like a 10s esc with brakes. I will hold out for the 12s model I think, as my selection of lower kv motors will suit it better.

doo540 12.12.2010 06:45 PM

You might be waiting for long time on that 12s esc.
Last time I called CC (last month) they said the 12 esc was on the back burner.
But they are trying to develope a 20s (yes 20s) esc for the airplane guys.
So we need to get people to boycott all airplane esc's from CC so that they will work on "car" market more. haha

doo540 12.12.2010 06:47 PM

btw who needs front brakes?
You cant win if you are on the brakes.
I will tell you this a 30lb 5T doesn't like to stop at all when using the stock rear brakes when moving 60 mph.

DrKnow65 12.12.2010 08:12 PM

doo540, I like the idea of 12S but I'm waiting on 8S with data logging and a real BEC circuit :-)

drkdgglr 12.13.2010 11:37 AM

http://www.castlecreations.com/products/mamba_xl.html

padrino 12.13.2010 11:44 AM

Quote:

Originally Posted by drkdgglr (Post 390321)

Without the price up for the combo yet it comes up as free in the cart, I wish :)

doo540 12.13.2010 09:41 PM

I have a real BEC its CC BEC PRO. Very nice unit and you can adjust the voltage output.
My Ice also has built in datalogger.........
Just missing reverse and electric brakes and car software, BUT I can run 12s and you cant. hahahaha

doo540 12.13.2010 09:44 PM

How soon before Mike has the XL for sale on here?

RRHobbydepot 12.17.2010 08:58 PM

Quote:

Originally Posted by doo540 (Post 390393)
How soon before Mike has the XL for sale on here?

I'm extremely upset that there is another delay with the release of the ESC. It looks like the distributors might not get anything in until close to the middle of January. We have decided to order some off brand ESC/Motor combos from Kershaw Designs because of this.

slimthelineman 12.17.2010 10:47 PM

Boo hoo. You know how long we waited for the damn mmm? So what it was worth it and so will the xl. It's not like you are the only one waiting, only difference is the others are smart enough to not waste time and money on off brand crap and wait patiently for the good stuff.


All times are GMT -4. The time now is 12:42 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.