![]() |
2650 kv bearing size ???
hey ,
i was driving my crt.5 with the 2650kv motor today then suddenly the motor stopped working and i check it it turned out that the front bearing broke , is this covered by warranty by castle if i only have the receipt from my lhs ??? if not where can i order a front bearing for it ???? thanks |
They are under a year old so yes - just send it in...
|
was the bearing "RUSTED" lol sorry i couldnt resist
|
Wow, a 2650 in a CRT.5! The motor must weight more than the vehicle. :lol:
|
loool , nah it wasnt.
yes, my crt.5 needed a motor since those cheap hobby city motors didnt last 1 and a half week , and the 2650 was sitting in the box so i said y not put it on the crt.5, first the bearing on the rear hub broke , then the bearing on the motor |
Ever put a couple drops of lube on them?
|
nope , it basically like new , ive only tried it twice on my buggy, then sold my buggy and the motor sat in the box for a couple of days then i put it on the crt.5, at first i thought that the shaft or gears broke but was surprised that it was the motor
|
Hello,
I swapped out all the bearings in my 2650 and 2200 for ceramics from Boca. The rear cover does come off, but when I did the epoxy pulled off some electrical tape that is wrapped around the wires coming out of the motor. I easily added some new insluation (shoe goo) and off I went. Motor is very smooth, and very cool. I used these from boca. http://www.bocabearings.com/main1.as...MR625C-YUU_NB2 I will post pics tonight |
I was also curious, what sized bearing do we need to replace the Tork Flux motor ones?
|
Quote:
|
I am assuming that they run they 5x16x5 bearing as well.
|
Quote:
|
Quote:
|
Quote:
|
5x16x5
5mm - inside diameter 16mm - outside diameter 5mm - thickness I know this for sure as I have replaced my castle-neus bearings. The front and rear are the same size. |
| All times are GMT -4. The time now is 01:14 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.