Hyper St conversion
 

Have not seen too many of these truggies on the forum, and now the the MMM is out, I figured it was time to start my conversion!

I picked this rtr model up used, $150 for the truck with everything and spares, so a decent deal. Still need to sell the nitro engine, and a few other nitro related parts. It also needs a good cleaning, as you will see in the pics!

Planned setup is a MMM running a 10xl, on 6s lipo. Picked up a neuenergy 3900 6s pack cheap from amain ($125), and the 10xl was from another member here. I will see how it does with the 10xl, but I would really like a 1515 2.5d. I am waiting to buy one, as CC are making motors, and I can wait if they will offer what I want!

Got a hyper motor mount from Mike, and put a kyosho plastic 46t spur on the diff. The hacker 15l is just for packaging purposes, checking to see if the 46/13 gearing will allow the motor to clear the rear chassis support. It looks good, and I have a little room to go down to a 12t pinion if I need to.

Battery tray will be made from kydex, and placed in the gas tank location. I will most likely put the mmm behind it on that side, but need to weigh all of my components to get the best balance.

http://i206.photobucket.com/albums/b...p/DSCF2120.jpg

http://i206.photobucket.com/albums/b...p/DSCF2121.jpg

Can't wait to see this take off. Got the chassis for a good deal

I checked out the deals amain had on neu packs. Might have to check again since I thought the 6s was around $170.

I can't find neuenergy packs on amain?

They are all gone:no:

It was a good deal, got a bunch of spares with it, and 3 sets of tires/wheels. I have quie a bit of cleaning to do. Olny broken part is a rear lower arm, and I have a new one coming. I should have it ready by the time the MMM shows up! Hope that esc is good. I will run it at its rated max with motor brakes too!

That explains why

Linc, this looks like it'll be a great build. Good luck!

if your going to run the mmm, why dont u get the castle neu?

I am thinking about it, however I want a motor with a kv around 1700, and they say that the 2200kv model will be the first. I just won a hacker b50 11xl on ebay, so I will most likely run that for the time being.

Ahh ok, i get it have you considered the KB series?

how is this going?

why bother cleaning?....its kinda like its June and the Xmas lights are still up on your house and you have thought about taking them down, but Xmas is only 6 months away and you hate to do double work......:lol:

True, but I like to take em apart, so that I have a better understanding of how everything goes together. And I like to check diff fluids, and apply thread lock. So I might as well clean everything as well.

I need to post new pics, almost everything is back together. Just need to make up some mounts and trays...

weird i like to do the same thing, that way when everything is together you can take off just exactly the part needed:yipi:

these truggies are awesome .. toughest thing ever .. i got 3 of em . 2x st pro's ( 1x 1515 2200kv mgm other os vspec 28 ) and a rtr 1512 2050kv MM .. ive had the first one for almost a year bash it and race it all the time. have never broken or worn out 1 thing . it still looks brand new other than the silicon shock booties have blown out.

i also noticed you have upgraded cnc turn knuckles, threaded rear shocks.*BONUS*

update pics. looks awesome