RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Crawlers/Scale Vehicles (https://www.rc-monster.com/forum/forumdisplay.php?f=35)
-   -   Motorcycle! (https://www.rc-monster.com/forum/showthread.php?t=12067)

bl-is-future 05.14.2008 02:58 PM

Motorcycle!
 
http://www3.towerhobbies.com/cgi-bin...&I=LXSGK4&P=ML

I am really thinking on an attempt to convert this to brushless. I think the hardest part would be a battery. My plan is to make a brick instead of long and skinny. If anyone could shed some light on any suggestions that would be great.

BrianG 05.14.2008 04:07 PM

I've been thinking of doing one of these for a while now, just had other things that had higher priority. Hard to say what will fit until you get it, tear it apart, and remove the smelly nitro parts.

bl-is-future 05.14.2008 04:34 PM

Yeah just figured if someone has done this already i could get some pointers. My only problem is i dont really have access to a machine shop to make any custom parts. I did see they have a electric version which has the same frame and metal parts as the nitro but that is discontinued. Wonder who else makes rc motorcycles??

BrianG 05.14.2008 04:41 PM

You don't really need a machine shop. Just a dremel and some other hand tools to make pretty much anything you want. Sure, it takes a heck of a lot longer, but think of the satisfaction! :smile:

Duster_360 05.14.2008 04:59 PM

Here's a good resource - mostly nitro, but there have been electrics. Good sources for custom parts too.

http://www.rcgroups.com/motorcycles-183/

bl-is-future 05.14.2008 06:16 PM

Quote:

Originally Posted by Duster_360 (Post 172825)
Here's a good resource - mostly nitro, but there have been electrics. Good sources for custom parts too.

http://www.rcgroups.com/motorcycles-183/

Awesome thank you! found some already electric kits that will make brushless plug and play. I am so excited now.

skellyo 05.14.2008 06:47 PM

http://www.thundertiger4u.com/thunde...er-p-7473.html

It's not discontinued...Tower just doesn't carry it.

http://www.ultimatehobbies.com/istar...=TTR6528F!1009

bl-is-future 05.14.2008 06:50 PM

Quote:

Originally Posted by skellyo (Post 172856)

Good find thank you! I think this is the route i will go. Thanks for the Link.

big greg 05.14.2008 07:39 PM

cool man get some pics up if you do it, thing will be awesome~!

bl-is-future 05.14.2008 07:42 PM

Oh i will post the project once it is under way jsut have to build funds again. This FLM full alloy savage really cost a pretty penny. But it will be sweet when complete too. The is somewhere on this forum as well.

big greg 05.14.2008 07:45 PM

o come on.... an expensive savage build, for that tin can... lol just kidding man looks awsesome as well

bl-is-future 05.15.2008 10:13 AM

Quote:

Originally Posted by big greg (Post 172875)
o come on.... an expensive savage build, for that tin can... lol just kidding man looks awsesome as well

With everything not inculding diffs and tranny but everything else i have $1000 in to the FLM Savage. Not to bad considering but still... quite a bit for a toy.

big greg 05.24.2008 01:24 AM

my revo is at about 1200 and counting~!

MAXXXMASHER 05.24.2008 09:48 AM

New Motorcycle
 
Have you seen this? I think I may have to get one! Of course I'll get the Orange one a put some Buell stickers on it!!

http://www.venom-group.com/storeitem...&cc=MODEL_MOTO

bl-is-future 05.24.2008 09:49 AM

Quote:

Originally Posted by big greg (Post 176153)
my revo is at about 1200 and counting~!

My lol my heli is about 1800 and counting if i crash. :lol::lol:

bl-is-future 05.24.2008 09:51 AM

Quote:

Originally Posted by MAXXXMASHER (Post 176216)
Have you seen this? I think I may have to get one! Of course I'll get the Orange one a put some Buell stickers on it!!

http://www.venom-group.com/storeitem...&cc=MODEL_MOTO

I have seen this and i know people that run them on some other forums and they love them. Only problem is they are 1/8 and i want 1/5 but was considering that one as well. Besides very very sharp looking. Love the looks of it.

DRIFT_BUGGY 05.24.2008 08:58 PM

Quote:

Originally Posted by bl-is-future (Post 176218)
I have seen this and i know people that run them on some other forums and they love them. Only problem is they are 1/8 and i want 1/5 but was considering that one as well. Besides very very sharp looking. Love the looks of it.

I didn't think they were out yet. Tower has them on their site as order pending http://www3.towerhobbies.com/cgi-bin...=LXUZB0**&P=ML but is also 1/2 the price of the 1/5

bl-is-future 05.24.2008 11:05 PM

Huh maybe the guys are testers. Is on rcgroups, there is a whole section dedicated to this cycle. I know it is a very new cycle and they must of been testers or something then.

Sammus 05.27.2008 04:00 AM

A couple vids my bro took of a few guys at an aussie track if your interested:
<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/9eWODmUBKpI&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/9eWODmUBKpI&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>

Trying to hold wheelies:

<object width="425" height="355"><param name="movie" value="http://www.youtube.com/v/VFC7PxvtL5g&hl=en"></param><param name="wmode" value="transparent"></param><embed src="http://www.youtube.com/v/VFC7PxvtL5g&hl=en" type="application/x-shockwave-flash" wmode="transparent" width="425" height="355"></embed></object>

Argh.. youtube embedding code isnt working for whatever reason...so here are some normal links: Laps, and Wheelie attempts.

brushlessboy16 05.27.2008 08:03 AM

check this out for all u guys lookin
http://www.rcuniverse.com/market/item.cfm?itemId=400171

bl-is-future 05.27.2008 08:24 AM

hmmm... self i say, should i get the neu for my savage or get the bike for sale on rcuniverse??? Self said BOTH. :lol::lol: No...will have to see what funds are like and hopefully i can swing both.

brushlessboy16 05.27.2008 04:20 PM

i know how u can save funds, give me the savage :D then u only have to pay for shipping :lol:


All times are GMT -4. The time now is 03:41 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.