Top Speed Wiht Full Spec's
 

I hope this wil be a nice and interesting thread.
So the meaning wil be that you give,
full spec's of your truck and the approximately top speed.


So I will start, most of you already now thet
I'am starting to build a E- savage the spec"s so far
will be

Wandere 20 9XL wiht a bk 9920 and a Ubec
Graupner loader Ultra duo 30-GRaupner +"Schaltnetzteil 13,8V / 20 A
And the german conversion kit

And i emailt Mike for the folowing hopups.
1xHPI aluminum shocks NR: A712

2xHBdiffcups NR:C8019

1xHPI bearing 8x16x5mm NR B085

2xspider gear NR: 87193

SOME SHIMING RINGS NR?????

1xHPI Heavy Duty 2-Speed NR: 87227

FLM Exteded tvp NR:FLM45100

FLM Servo plate kit NR:FLM45500

FLM Center skid plate NR:FLM45110

2XFLM Servo mounts NR:FLM46000

Brushless Heatsink

Some diffrend tier"s bud I dont now which won I will be.

But this list on 20 cells I hoop (and some good guys on this forum say) it will go to 55mph or so:cool:

Just finished my evo conversion abut 2 mounth ago.

Specs:

13 unmatched gr 3300 batts (why such a odd # I don't know)
feigao 9l
bk 9918
2055 steering servo ( I know its crap but the truck is so light it doesn't really matter)
blue front shocks/ purple back shocks/ stock shock oil
wieghs probably 9lbs
loocked emaxx trans in first gear ( lhs hasn't come in with the 2nd gear yet)
84/34 gearing
final gear ratio is 20 to 1

Tops out at probably 35mph

pushed my maxx 2 106kph :D

HOLY $%*#! what were you running? a jet engine? i thought my electric revo was fast. it tops out at about 50.

Hehe, squee, 106 km/h=65.8 MPH. Quite an acheivement, but it's not as fast as you thought :P

You can't just tease us with that speed and not tell us what you got under the hood! :D

maxd-out, thanks for joining.

I read some things about that truck, cant remember what or where.

I just remember that is was bare stock, right?

pity Promod isn't here, he has got to the 70mph with his truck.

Its a small small world. I race with Maxd Out :)

I was also at the speed run. Done in a area around 300meters long, slowign the truck down caused it to spin (super doughnuts!)

That same day I blew the doors off a blown Revo with my Mini-T

I won't spoil it for Maxd Out - He can give you the Maxx specs

BB

Way inpresive but we want the full spec's of the car;)

SERUM I now you have to got some truck's and the spec's on them so come on put it in to the groep;)

Look you understand what the meaning of this thread is:D

I just put some new diff gears in my dual BL Tank (aka fat Maxx) last night. I'll try and get a top speed on it over the next few days and report back.

Hi guys
sorry for taking so long to respond to your questions

What was uder the hood

Shultz 32/170
24,3300 GP Cells
Hacker C50
27/56 pinion & Sper
Kippster diffs

This year we will be running the same set up on a gorrilla chassis with the full 32 cells

Should be fun :)

Woot c-50 baby! Nice!

Give us more pic's and perhap's a video or 2. I want to see that beast in action.

106kph vid
 

:)

Hey, comon, buddy, post the video already.

Cant get the vid to work ??

You can throw it online on rcpics.net..

Yeah trow it online at rcpics.net:D

And trow us the link man I would love to see it fly by:cool:

Sorry guys GTG to bed getting late here ,i have a few video's of her ,i will make sure i get them on line for you 2morro,

That controller is stupidly big indeed.

That is a big pile of batts on the truck to. :D. What kind of motor is that? I know it is a hacker c50. But what about turn is it s L or xl?

how about this, this is fast
highly modified 100mph HPI Super Nitro RS4.

I'am sorry bud I can't find the spec's (It's not mine
:M: )

http://videos.radiocontrolzone.com/100mphcwh.zip

That's nothing.

http://rcvehicles.about.com/gi/dynam..._nitro_cwh.wmv

Not bad, but let's see those guys do it in a straight line.
Might need an airport runway for that to happen. :D

Maxd out,
where did you get these tires? How did they hold up?
Thanks.

Looks like it are GPM slicks..

106kph
 

the hacker is a standard C50 L although Hacker has made us a special modified motor built for the next speed run.
The tires are Panther slicks showen in the photo ,these tire's are totally unpredictable at high speeds (Razor Blades) During the testing of these tire's the truck was sent into the air @ 94kph . the 106kph run were on the IMEX foams ,but these also have to be glued as they peel off the rim @ 125kph (FREAkIN SCARY)
The twin mill shown in this photo was the truck that took to the air

http://www.rc-monster.com/forum/atta...=&postid=26811

What's the two small things in the front wheels??? I must be tripping - because they look like 2 cells to me?? -lol-

have you ever tried the duct tape on the inside of the tire. I have tried this and it really helps with tire swelling.

Those are the pivot balls/wheelhubs/axle carriers/knuckles, I still have not found out the exact name for these things, everyone calls them differently.

mann - i have to see it with the rim off - they still look like 2 small cells to me hey -lmao-

Duct tape would help you out..

Check out my site, under balloon experiment..

How about this red gearcover on the tranny on your dual maxx...I have never seen an aftermarket gear cover !?

Knuckels are made dy RPM,they are white in colour but the blue rim makes them look blue,the things that look like cells are a aftermarket pillow ball retainers made by traxxas blue in colour,the red gear cover on the twin mill has been air brushed with a metalic candy red .
ive found that having no ballooning in the tires makes for a more stable truck. the IMEX Foams are also very light .
32/170 esc is pictured next to a mini t

the 36150 would be almost just as good with a small size. ( or was it 32150? cant really remember).

Amen Harlock.. ;)

I had a 32/170 and never used it. The darn thing was just to big.
A 36120 or even a 3695 would easy get the job done.
Thank you,
Promod

In fact, if you are able to make it float, and you've got a private island.. Playa del schulze...

...Still waitin' on that vid...:p