![]() |
Does anyone have a Turbine??
I'm looking for a turbine for my 09 project X build and I figured I would start here! so with that said does anyone have one they are looking to get rid off?? :whistle:
:whistle: It must have at least 14 lbs of thrust, the higher the better, :intello: it needs to be albe to push around 30 lbs of truck and stuff Thanks guys.. :party: Have a great weekend everybody!.. :yes: |
Quote:
jet battle truck:yes: |
30 pounds?
Give the man room! You know you could probably buy a full scale surplus heli turbine for the price of a JetCat sized one......... something to consider is all hehe. |
And I hope a small child is not part of that 30 pounds of "truck and stuff" lol.
|
So that's a NO write?? :lol::lol:
thanks anyway guys.. :intello: Anyone else?? :neutral: |
:party::party:the man has clearly smoked himself silly. I can't wait to see what you do next you are an r/c maniac!
|
i gotta move to CA
|
Damnit paralyzed beat me to it.:lol:
|
Ha! I'm glad we're all on the same page:lol:
|
Actually I've been looking @ 1/5 scale heli's & 40 pound jets, that's actually where I got my idea to build the first 1/5 scale monster truck thats powered by a jet engine.. :intello:
Tim the tool man Taylor did it too his Lawnmower!..:yes: Why cant I do it on a RC :wink: P.S. Cali is the home to humbult county!..:rofl: |
more power!
|
Grunt. grunt, grunt, grunt LOL.LOL...
|
BAJA 5B TURBINE POWERED FTW!!!!!!!!!!!!!!!!!! lol
|
|
WOW thats great!.. I found a few but they were all $3200 and up, some of these are under $2K
Thanks for the link Sir.. |
OK I made two offers, we'll see if I get somthing new this weekend or not..
thanks guys.. Wish me luck.. |
Man if I had that kind of cash I'd buy myself a car... This vehicle is gonna be crazy.
|
Uh Oh???
SHAUN stop what your doing and step away from the R/C workbench. Don't turn around, and don't look back. Just slowly back up and run like hell you crazy son-of-a-#(%$*&):na: What in the hell are you thinking:eyes:. You really need to slow down a bit and take a few deep breaths. or breasts which ever you prefer???:neutral:
Seriouly Shaun have a little bit of fun playing with the toys you have already built:yes:. Enjoy some quality time with the wife and kiddies:intello:. Life is too short young man. We all look forward to seeing your next project though. I am sure with you it is only going to get better and better Sir. We all love watching you in your manic, drunkin state of mind creating master-pieces of terror. You do good work Shaun and I am sure that we will all be amazed when you unveil your next build. I bet the cool thing is that you are learning a lot about the engineering of these remote toys that you neve have before. It is addictive and you get a kind of natural high doing this kind of work, don't you? Yea have some fun with the family too and we will all be here waiting for your next build Sir. |
Quote:
I don’t need another car, I do need to build something next year thou and I'm only budgeting for one build :wink: (ONE BIG ass over the TOP!) build and I've giving myself the whole year to build it. :party: |
Quote:
I'm learning all the time and loving it!, I'm going to be venturing into untapped water and I'm really looking forward to my next years project, the research I’ve been doing latly is really exciting and :whistle: I’ve got some GREAT out of the BOX ideas I’ll be running by you guys next year. Hopefully my boy will jump in and help out, I always need to find time for them as all dad’s do.. Thanks for all great over the top compliments Jerry your always far too kind sir!.. (Thank you) :wink: I'm hopping to hear back from one the guys this weekend I placed on offer on we’ll see, it's Christmas and they may need the money more than me.. (lets hope so!).. :intello: Have a great weekend sir |
|
LOL.LOL.LOL.....
That's great!!! Thanks for the laugh!.. |
Quote:
jet assisted take off arnt they really rockets tho? |
Yeah I know. I always think that when I see the acronym... Technically it is a jet, since a jet engine is any engine that relies on the expulsion of hot gasses for forward thrust.
|
Well I was shoot down by one of them.. Boo.Booo...
lets see what the other guy says.. |
Offer them a trade for the Battle Truck! NOBODY would refuse that! :grrrrrr:
|
:no: NOoooo the battle truck and my GR3 I have NO plans on ever getting rid of those two builds..:yes: I can sell the rest off but I'm keeping, always keeping those two builds.. :yes:
I'll find a something that will work.. I just can’t spend more than 2k on the motor and right now I'm asking low IE $500 off what they are asking for it! It’s Christmas someone has to bite :wink: Who doesnt want $1500 bucks.. :party: |
Is this something like you're trying to do?
http://www.youtube.com/watch?v=92lpSQT1ZRY http://www.youtube.com/watch?v=kbA46qLUIhk There was a guy that had an emaxx-type of vehicle with a turbine but I can't find the vid right now. IIRC, it moved, but created a lot of wind for not much motion... |
Quote:
Could it be this http://www.mkeeler.com/models/marjet/? That is a fg though.. |
Quote:
:diablo: (SHOOT!) Way to kill a dream Brian!… :na: Thanks… *&$^#%# grumble, grumble :whistle: Now I'm going to have to do like the pioneers :oh: / IE (young guns) and visit the sprit world for gaudiness (again).. :wink: :lol: :lol: |
|
if nothing else it sounds cool
|
You could make one. I heard it's easy for the mechanically gifted and you certainly seems to be :lol:. Plans for one are all over the internet and you can even see home made turbines in youtube. I love watching them.
|
Quote:
And, the truck I was thinking of was not that FG, IIRC it was more shiny with al and more emaxx-like. |
Ok, I thought so too hehe. Just wanted to share it :smile:
|
these might not be turbines but here is a link from the online store to Tamjet which is a serious rc jet site, about 2/3 of the way down the page they have 2 different plug and play systems...it is one unit which includes the fan, motor and esc...they use a CC HV85 ESC and one uses a Neu 1515 and another a 1521 motor...one is the ds-51 and the other the ds-75
http://www.tamjets.com/original/prod...4362dd2dbc08c9 |
Quote:
|
Quote:
:surprised: Ok this is almost exactly what I had envisioned when I visited the sprit world! :lol: that just freaky!, but of course mine was on a 1/5 scale with a few extras, but that was soo close it was scary! Thanks for posting up all the videos guys :yipi: it was awesome seeing all the turbine powdered builds.. :yes: At this time I'm now unsure for my 09 build, I hate to do something that has been before,:whistle: so I'm now exploring other options..:neutral: Maybe a 4 motor (ducted fan) hover build :oh: or a combination robotics and something!, :intello: I just know it will be Project X material.. :yes: Thanks for everybody times and suggestions you’ve been great!.. P.S. Brian G, I forgive you!..:lol: |
Wacky.
Yea we know that you will probably come up with something totally wacked out anyway Shaun. By the way, whats the sprit world???:rofl::lol::rofl::lol:
|
Just strap some servos and a reciever on this thing. http://www.youtube.com/watch?v=xEsSeQagrow This is good stuff. Notice the safty equipment.
|
| All times are GMT -4. The time now is 03:18 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.