other powerfull 1/8 esc
 

i know that lutach have made a tread on it but now all the specs are avalaible

interessting but how reliable???anyway this brand seem to be good...(i use the 35 amp version and nothing wrong to say!!)


http://www.hobbywing.com/english/Art...?ArticleID=429

I went to that link to check out the scpecs and was infected by: JS/SillyDlScript.FO

My antivirus cured the infection but I'd figure I'd let others know

How odd, I too was looking at that earlier today. Looks quite nice actually and has sensorless & sensored motor support etc etc, but until someone feels brave and buys one (where ever they end up for sale to as Hobbywing dont sell direct), we just wont know... :neutral:

hmm...it came up the first time, but the second time it told me some malware tried attacking y computer through some BS .exe crap....cuz macs have .exe files....:na:

I get that when I go to hobby wing as well, avast aborts that connection for me though.

.dk

I don't even see the full page. My AV must just block suspect content...

dammmm!! sorry guy's my pc dont see that sh&*% $*():oops:

Here you have:

Picture (safe):
http://www.hobbywing.com/upload/car/ezrun-150A.jpg

Manual (safe):
http://www.hobbywing.com/upload/manu...Run80A150A.pdf


1 Specification

1.1 Output: Continuous current 150A, burst current 1080A.
1.2 Input: 6-18 cells NiMH/NiCd or 2-6 cells LiPo.
1.3 BEC Output: 5.75V/3A (Switch mode built-in BEC).
1.4 Resistance: 0.0002 Ohm.
1.5 Motor Supported: Sensorless and sensored brushless motors
1.6 Suitable Brushless Motor: 3.5T and > 3.5T
1.7 Suitable Car: 1/5, 1/8 on-road or off-road cars / trucks for competitive race.
1.8 Size: 68mm(L) * 55mm(W) * 45mm(H).
1.9 Weight: 150g(Without wires)


2 Features

1.1 Compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LRP and Feigao, etc.
1.2 Excellent start-up, acceleration and linearity features.
1.3 3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately)
1.4 4 steps of maximum reverse force adjustment.
1.5 Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
1.6 9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
1.7 Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
1.8 8 steps of timing adjustment by software.
1.9 Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
1.10 Easily program with only one button and compatible with pocket-sized Program Card.
1.11 Firmware can be updated through an USB adapter (Optional equipment).
1.12 Splash proof and dustproof.

thanks:yes:Maciolus now when are the release date:whistle:

4S, 80A version is avalible:
http://cgi.ebay.com/EZRUN-13T-Brushless-Motor-2300Kv-80A-ESC-Program-Card_W0QQitemZ170288860492QQcmdZViewItemQQptZRadio _Control_Parts_Accessories?hash=item170288860492&_ trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65% 3A12|39%3A1|240%3A1318|301%3A0|293%3A1|294%3A50
with strange 81.5mm x 46mm motor

Ewww! Both the motor and ESC have fans.

http://www.rc-monster.com/forum/cust...vatar444_8.gif http://www.rc-monster.com/forum/cust...vatar444_8.gif http://www.rc-monster.com/forum/cust...vatar444_8.gif http://www.rc-monster.com/forum/cust...vatar444_8.gif

:lol::lol::lol:

so i cant wait for testing the 150amps unit:whip:

...and the price

i bought a 80a esc from this on ebay but for now i am still waiting for it..
i will use it on a e-revo with a feigao 9xl and 2lipos of 2s 3000 in serie..

regards

How long ago did you order it?

4 day´s ago here on a european store that by the way have another ...

With the holidays upon us it is no surprise to me that shipping is slow.

yes, in this period of the year is always dificult to ship things!!

i am waiting for all... e-revo, esc, feigao, lipos....

look what ive found:whistle:

http://cgi.ebay.ca/EZRUN-150A-SD-Bru...1%7C240%3A1318

The spec have been available for a while now. I guess HW finally fixed the issue with the 150A unit. Now we just have too see how the Speed Passion made for the US market will be priced lol. Caster did it right by going straight to HW, but Caster has the Asian Ebay vendors to deal with.

im closed to the buy it now:whistle::yes:so i saw your post and im scared.....what kind of issue???

I wonder how these ESCs are rated: per FET spec, or realistic values given the temps we run them at. :whistle:

The last time I spoke with HW they said it had some harware issue, but I guess it's fixed. Give it a try and let us know how it does.

Same here. The eZRun line is supposed to be the economical line from HW. I'm working one a high end 1/8 scale ESC with the factory that is currently doing my 10th, micro and now crawler ESCs.

HW has just launched and started shipping the new 1/8 ESC here in China. Many of my RC friends have got it and have very positive feedback, especially when compared to their disappointment from earlier MMM V1&V2s.

The interesting point is the ESC supports sensored motor, while no 1/8 motor capable to handle 6S is available by this moment.

The MMM supports a sensored motor.... sorta - just don't hook up the sensor wires. :wink:

Is that means will not work with neu 1y

I run MMM + novak 4.5 without problem just forget sensor wires
:)

You are definitly right, so I would change my word as :
The ESC supports the sensors inside some certain motors.:na:

does the 80a version be enough for a e-revo on 4s lipo?

regards

HW asked for my help to find a motor manufacturer that would make a motor for them, but I'm going to save my good contacts for myself.

:lol:

Borderline at best, though a few guys are using the 60 or 75amp versions in erevos with 4s lipo and 9XLs, so... :neutral:

hello neil!!
no problem, i bought the 150a version too.....:rofl:
and i received the 80a version today!!
look´s great and well built with a great fan,but only for next week will be tested!!!

regards

Is there such a thing? :wink:

i don´t know!! but for a "chinese" esc look´s real good... i only don´t like to see the circuit board being outside the 2 sides of the case!!! hope it don´t break on a rough jumps or backflip...:oops:

Well, the Mamba Max has an exposed circuit board, and it seems to hold up fine. I would just make sure that nothing metal could contact the exposed area, and you should be fine.

so that is the problem of the mamba´s even on v3?

You're probably thinking of the MMM, which is totally enclosed. The MM has the exposed PCB...

ok, my mistake!! the green mamba ok!!
let´s see how it handles this baby on my e-revo!!!
i will go to a motocross track and if it handles the jumps and falls it will handle the rest.................:yes:

The chinese esc looks like a sandwich with the ham poking out either side.. Should be okay, you'd need to really wrench down on the pcbs to snap them off, but it does kinda kill the otherwise clean and beasty look of the esc I must admit.