screws for UE towers
 

Are these the right size and length screws and nuts to attach the shoch standoffs to the ue towers? Would they work okay?

nuts:
http://www3.towerhobbies.com/cgi-bin...&I=LXAMG9&P=ML

screws:
http://www3.towerhobbies.com/cgi-bin...?&I=LXTW50&P=7

Would these be long enough to mount the both shocks (each side) through the same mounting hole?

You need 4x M3 nyloc nuts, and 4x 40mm M3 bolts- the longer the better actually as 40mm is barely long in enough as I found once.

Would this work? box of 10 screws so I would have extras.
http://cgi.ebay.com/ebaymotors/M3-3M...Q5fAccessories

Yep, that should do the trick nicely.
Might need to trim them down actually, but thats no biggie- better too long than too short*...

*thats what she said.

*sigh*

What? What?

You're in a mood tonight, huh Neil? :lol: :drunk:

Saddly not, just having fun finding innuendo everywhere I look... :mdr:

thinking about getting this:
http://www.horizonhobby.com/Products...rodId=ASC89452
Would this be better? How many screws come in a pack? How fast does horizon ship (standard shipping) and what is the quality of their service?

I think theres 10 in there, Nice find, ive been looking for longer screws for my UE towers too. http://www.losipartshouse.com/servle...-X-50mm/Detail I bought the last set from them just now but looks like theres 10. Getting it priority so should have them by friday and ill let you know

Tonysscrews.com good prices and great service.

Those AE screws were perfect.They do come with 10 peices and are 10mm (?) longer than the stock UE screws, perfect for the spacer I needed to put in there to get my losi 8T rear shocks to line up perfect on the UEs

What spacer did you use?

I have a tackle tray of stainless spacers I got from an old True Value store (score !) 5mm spacer behind the shock stay thingy.

http://i278.photobucket.com/albums/k...2/f9d6c756.jpg

Excellent! That is just what I am looking for.

http://www.rc-monster.com/forum/show...191#post262191

The UE tower on a hybrid bulk with RPM arms sits back so far that the shock rubs on the 3.3 shaft. I need about 3 - 4 mm.

Seems you have the same issues. I used a m3 washer on the bottom aarms to pull the bottom out 1mm, then the 5mm (ish) spacers on top so now the shocks are straight and dont rub on the sliders. The AE bolts seem really strong, havent bent one yet in 3 good runs with some jumps off a toys r us skate ramp.

Ok help out a noob. What are these measurements. length x ID x OD ?

https://rcpcrawlers.com/home.php?cat=42