Scale 1/8 super Rock Crawler 1 seater buggy with in dash MP3 stereo
 

Yep you heard right


Scale super Rock crawler single engine
Hand made Chassis, MIG welded 1/4 .035 wallstainless steel tubing
Custom angled solid stainless steel axles
Axial Transmission
Revo drive shafts
Losi after shock Center Diffs, with custom made lockers
Hyper 8 drive axles
Madforce hubs

4 Wheel steer
2 wd and 4wd and rear dig with custom mechanical DIG setup

4 link suspension front and rear
Delrin Acetal Links

HDPE bottom Skid
Polycarbonate side body panels

Stereo
6 watt Altec Lansing speakers x4
Sony MP3 player in dash , 3 tone LCD lists songs
Plays real V8 engine sound

55 Turn Brushed for Crawling
BM16 1005KV Brushless for Rock racing

Batteries pictured are 8 cell 4500 Nimh, Recently Replaced with 3s Lipo 2250
Weight with Nimh is 12 lbs, so with Lipo it will be about 11
Drive time about 1hr 15min

Wheel base 18"
width 14"

Spectrum DX6 radio
HItec 5995 Front and rear servos
Mamba Max ESC
Castle BEC
DIG servo

I am very pleased and amazed at with the outcome and climbing
Crawls Great but weak spot is the tires

I know there is more details

Let me know if you have any questions

Start to Finish Build thread in my SIG below, LOTS of Pictures
detail cool pics

that thing is bad ass, yeah:yipi:

i love the use of lst diffs:rules:

too cool man, we need to see more of your projects:yes:

i have seen this before RCC...

looks just as good here man. glad you got it all completed!

Yea the build thread is there, a guy on here saw my link and said I should post it on this forum for the guys to see,

I just read that the losi LST diffs are very strong and they are dropping them in the emaxx/revo as upgrade, I used the same diff in my Cralwer. glad to see I picked a strong choice :mdr:


Some more pics of the build

What Linc said, that looks bass ass :gasp::smile:.

That "speaker" box looks good mang. Nice build!

Thanks man, it was a rush job as I was leaving for Rubicon trail trip in my 1:1 and needed the crawler for the RC crawl comp

Everything is a tight fit under there, Mamba max, Axial Tranny, DIG servo, stereo amp circuit board and lots of wires :oh:


Thank you very much I think so too , came out pretty good for my first.

looks great esp making the axles

And you call it a "rush" job:party::lol::lol:.

Looks real good.

going to do some aditions
Lights
3s Lipo
easy access push button volume control
Went crawling at the local resovoir while it was low, crawling with some guys with the little 2.2's
found some pics
[IMG]http://i588.photobucket.com/albums/s...G1390JPGwb.jpg[/IMG]

[IMG]http://i588.photobucket.com/albums/s...October001.jpg[/IMG]

That is.... uber......

say what ? sorry dont know that one

[IMG]http://i588.photobucket.com/albums/s...October006.jpg[/IMG]

I'll get some Video soon of the sound system and the DIG working

[IMG]http://i588.photobucket.com/albums/s...r/CW120015.jpg[/IMG]

[IMG]http://i588.photobucket.com/albums/s...r/CW040225.jpg[/IMG]
[IMG]http://i588.photobucket.com/albums/s...r/CW040224.jpg[/IMG]

Did a little video today
I'll have the music on the next video


It's getting some finishes, so the front shocks are not done yet


short sound system video

I will post some better video soon

[IMG][/IMG]

Did a little work on it an shot a short video. I will post better ones of the music and the DIG and stuff very soon


ENGINE SOUND VIDEO

http://s588.photobucket.com/albums/s...October025.flv

Pretty cool man. I'm liking that "blue chassis lift".

toasted lipo

here's the 3rd cell

I already removed from the pack

Definitely gone, just toss it in the trash. You can put some tape over the tabs if it makes you feel better.

Did you get the pack wired back up correctly?

both cells are 4.20 volts
guess I connected to wrong tab
so I'm going to solder them together for a 2s

Excellent job on that, very impressive indeed

Castle has done some upgrades, so now my Brushless has a very good drag brake

latest video,
need to add weight in front wheels though
http://s588.photobucket.com/albums/s...t=CIMG1563.flv

I did this log no problem so I grabbed camera but no luck driving and cam at same time. I should have grabbed a buddy to film
http://s588.photobucket.com/albums/s...t=CIMG1544.flv

after this I broke the dumb 48pitch spur gear
Now running 32 pitch 66/14 55:1 ratio 1.8 HP
axle torque 46.73
3s 30/50 2250mah

Looks like a fun place to crawl! What ESC are you running? Is the better drag brake from the firmware update at the beginning of August?

wow! this is an awesome build! there is tons of custom fabrication. and i also watched the street luge video in your sig. its awesome!!

thanks Mikey

Some re-work pics
http://i588.photobucket.com/albums/s...r/DX120395.jpg
http://i588.photobucket.com/albums/s...r/DX190390.jpg
http://i588.photobucket.com/albums/s...r/DX190394.jpg
http://i588.photobucket.com/albums/s...r/DX190392.jpg
http://i588.photobucket.com/albums/s...r/DX190405.jpg