I am parting ways with my RCM Brushless GMAXX.

Here are the specs:

• G2 Aluminum Extended Chassis
• G3 Race Suspension
• G2 Skids
• RPM Wear Plates (Blue)
• RPM Front Bumper (Metallic Silver)
• RPM Knuckles (Blue)
• RC Raven Body Post (Blue)
• RC Raven Dual Rate Springs (Blue)
• Feigao 9L
• Warrior 9918
• UBEC
• Maximizer 7075 Diff Cups Front and Rear
• Integy Diff Case and Collars Front and Rear (Silver)
• Integy Aluminum Front Bumper
• Integy MSR5 Shocks (Silver)
• Revo Rims and Tires
• ANCNC Aluminum Bulkheads Front and Rear
• UE Steel Idlers
• UE Titanium Drivetrain
• RC Logic CVDs
• Hitec 645MG Steering Servo
• RC Monster Heatsink/Motor Clamp (Blue)
• Lunsford Titanium Turnbuckles
• Pro Line Servo Saver
• Strobe Slipper
• Mod 1 Pinion
• FLM Half Tranny Case
• GMAXX Single Speed conversion
• Airtronics 75MHz FM Radio w/ extra receiver and crystal
  
• F350 Ext Body (Blue w/ Chrome tribal design)
• F350 Ext Body (Orange w/ Red/Yellow Flames)
• Revo Crowd Pleazer (Gray w/ Blue/Yellow Flames)

Here are a few pics. I don't have the rims and tires in the pics anymore. I picked up a set of slightly used Revo rims and tires that I haven't even put on the truck yet.

Email or PM me if interested.

I am selling the complete truck only. I am not parting out the truck.

I only ran this truck for 5 minutes in my backyard on grass to test it out. Everything is in PERFECT condition and has no scuffs or scratches on it.

No trades.

Thanks :017:

I would love to own a truck like this, Why are you selling such a beuty, maxxfusion?

I just dont have the time for it. It has sat on the shelf since I built it really. I also have my rusty and pede to play with.

thats suks to have no time for it
how mutch u want/asking?:004: :013:

same here, intersted in trades. SURE U WONT PART OUT ANYTHING?

NO TRADES !

I will not part it out.

I remember when you built her frank - Man seems like just yesterday - Only the best went into this truck - and still brand new - Someone is going to get a smokin deal...

I always thought that it was the truck of chase.. :) didn't payed close attention..

Yep. I started building it when the RCM web store opened. Does feel like yesterday. lol

why god why....such as beut.....

how much?

I am considering parting out this truck. I would rather sell some of the parts together as I dont want to tear down the whole truck.

Would you part out with a strobe and a mod 1 pinion? And the strobe sprong if you have one:D

lol, i wanted teh strobe slipper setup! and teh spur! How much for the bl system?

how much for the single speed conversion?

That sure is a pretty truck to sell. That is alot of money in it to. I would love to get it but not sure if funds would allow right off.

Maybe you could pay him in bits? :D

Updated
 

I have sold some of the parts on my truck. Here is a list.

G2 Aluminum Extended Chassis - SOLD
G3 Race Suspension - SOLD
G2 Skids - SOLD
RPM Wear Plates (Blue) - SOLD
RPM Front Bumper (Metallic Silver) - SOLD
RC Raven Body Post (Blue) - SOLD
Maximizer 7075 Diff Cups Front and Rear - SOLD
Integy Diff Case and Collars Front and Rear (Silver) - SOLD
Integy Aluminum Front Bumper - SOLD
Integy Aluminum Front Bumper - SOLD
ANCNC Aluminum Bulkheads Front and Rear - SOLD
UE Titanium Drivetrain - SOLD
Lunsford Titanium Turnbuckles - SOLD
Pro Line Servo Saver - SOLD

RPM Knuckles (Blue)

Feigao 9L
Warrior 9918
RC Monster Heatsink/Motor Clamp
UBEC

Integy MSR5 Shocks (Silver)
RC Raven Dual Rate Springs (Blue)

Revo Rims and Tires

UE Steel Idlers

RC Logic CVDs

Hitec 645MG Steering Servo

F350 Ext Body (Blue w/ Chrome tribal design)

Let me know if you are interested in any of the parts above.

How much for the ubec?

The 9L, 9918, UBEC, and Heatsink is selling as a combo.

Everything is all wired up nice and neat and the controller is programmed.

Plus you will get 2 pinions.

LMAO - whoops....

Some times you better to part it out for money. Seems to get more. I sure wish I could have got it. Oh well maybe the next one.

O well that answers my question.

Here is the contents of the Brushless System. A soldered together nice and neat. The controller is programmed and ready to go. Just drop it in.

Feigao brushless motor 540 9L
BK Electronics 9918 Warrior Controller
External BEC/UBEC
RC-Monster Brushless Heatsink/clamp "L" Size -Blue
2 pinions (15 & 16 Tooth)

*bit off topic*

What is the stuff called thats covering the wires from the motor to the controller?

Thats ok. I shrink wrapped all the wires to get them all blue. I didnt want the red and black wire showing. I was trying to keep everything blue on the truck.

no, I meant the stuff covering the wires between the motor and controller. cheers

i think thats braid or somthing.

fuel line probably. I'll dib the gorilla transmission if it isn't already sold.

He said its on ebay, go check !

Yeah; braiding or sleeving. Computer nuts (myself included) put this stuff over the various wires in their computer cases. Improves airflow (read: better cooling) and just looks sexy. :)

Here's one of many places to pick this stuff up: http://www.crazypc.com/products/case...ng.htm#sleeves. The sizes listed are "closed" widths. This stuff expands quite a bit depending on how many and thickness of wires being covered. Looks nice, but hard to clean when it gets dirty...

Cheers for the link Brian, and thanks everyone else :)

Yes that is compuer braiding.

I did put the tranny on ebay. Its not gorillamaxx conversion though.

Here it is. EMAXX Tranny

so what about the gmaxx tranny? You said you had one?

I updated my list.

does that mean it is sold?

Items left
 

I have a complete set of Super-Duty MSR5 Silver Shock Set (8) for T/E-Maxx. They have upgraded E-Maxx Blue Powder Coated Dual Rate Shock Springs on them.

E-Maxx Blue Powder Coated Dual Rate Shock Springs
- The Dual rates are 3ppi at the top and 7 ppi at the bottom provides both a smooth ride at low speeds and stable ride at high speeds.

Brushless System - SOLD

Strobe slipper with Ofna gear mounted. Never installed on a truck. SOLD
Complete set of 4 RPM knuckles (Blue) with oversized bearings.

Mod 1 Pinion 12 tooth 1/8" bore

Stock Revo rims and tires.

Aluminum Hexes (Set of 4) - A high quality O-ring is installed around the hex and insures a snug and constant fit for the drive pin.

Ygpm! :)

The rest went on ebay today. Here are the links to each auction.

Super-Duty MSR5 Silver Shock Set (8) for T/E-Maxx


T/E-Maxx RPM Blue Steering Knuckles / Axle Carriers Set


6 RD Logic CVDs 2 Drive cups 3 aluminum wheel hexes


1/8" bore Mod1 12 Tooth pinions