RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   General Discussion (https://www.rc-monster.com/forum/forumdisplay.php?f=20)
-   -   KRYLON FUSION for Rims (https://www.rc-monster.com/forum/showthread.php?t=28040)

radioman193 09.09.2010 08:01 AM

KRYLON FUSION for Rims
 
KRYLON FUSION

works AWSOME!!!!!!

this was 5 coats
over a week of power sliden in stones every day and NO chips or nothen
thay look like the day i painted them!

no prep was needed!!
all i did was clean the rims first with dish soap and used
one of them green scratchy dish pads let dry and painted them 5 coats with a half hour in between coats.

Fresh and clean paint

http://www.frontiernet.net/~radioman193193/rim2.JPG

and here we have over a week of rocks and powersliden

http://www.frontiernet.net/~radioman193193/rim.JPG

and here this is NORMAL paint after 1 and a half days of the same

http://www.frontiernet.net/~radioman193193/rim3.jpg

so that shows that KRYLON FUSION
works SWEET for rims in My book!!!

plus you dont get that SHINE with dye
unless you clear coat them after .
This way is one step.

http://www.frontiernet.net/~radioman193193/fu.jpg


<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/QHB6PeR9oQk?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/QHB6PeR9oQk?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>


<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/M8BoWLiDLhU?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/M8BoWLiDLhU?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>


<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/wo94KEfJ0KA?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/wo94KEfJ0KA?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/dum9mQTRMZ4?fs=1&amp;hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/dum9mQTRMZ4?fs=1&amp;hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

radioman193 09.09.2010 08:07 AM

well the paint is Still holding up just fine here is after 15 days

http://www.frontiernet.net/~radioman193193/15_1.JPG

http://www.frontiernet.net/~radioman193193/15_2.JPG

:mdr:

Drivinfast247 09.09.2010 05:31 PM

Good to know. Thanks.

Freezebyte 09.09.2010 05:36 PM

Holy hell, this thread got a supreme cleansing with 100% grade A Moderator bleaching!

Oh....nevermind

JERRY2KONE 09.09.2010 05:55 PM

No
 
NO look again. I think he was disapointed that no one was writing in his thread, so he opened a new thread on the exact same subject a second time.

radioman193 09.09.2010 06:26 PM

Don't start.
and no thay were ALL reported.

and stay on topic.

Bondonutz 09.09.2010 07:40 PM

Quote:

Originally Posted by JERRY2KONE (Post 379683)
NO look again. I think he was disapointed that no one was writing in his thread, so he opened a new thread on the exact same subject a second time.

People wrote plenty, just nothing he appreciated even tho is was funny.

TexasSP 09.09.2010 08:03 PM

Quote:

Originally Posted by radioman193 (Post 379694)
Don't start.
and no thay were ALL reported.

and stay on topic.

Way to act like a grown man and take a ribbing. :whip:

Pretty much knew you must have whined to get the thread deleted since it didn't go your way.

Welcome to RCM, we dog on each other all the time. :diablo:

Even freezebyte learned to take it in stride. :lol:

Good luck with this thread though and thanks for reporting us. :whistle:

Even the handicapped guy thought it was funny! Of course we love our little cuddly Harold though don't we?! :yipi::love:

and we know linc really loves Harold..........:yes:

radioman193 09.09.2010 08:16 PM

#1 I can take quite a bit long as its in Good taste.

#2 I did Not have it deleted.
it was deleted cause the mess you people made out of it.
#3 ty

bryan 09.09.2010 08:38 PM

:neutral:I for one am happy that you enjoy using . krylon fusion paint I really dont think that this needs to be drilled into everyones mind the way that you are promotingkrylon fusion paint,so maybe in the future you will recieve better responces on your threads,if you just say, Hey guys check out this paint !! It does appear to be working out good for you.ENJOY

JERRY2KONE 09.09.2010 09:06 PM

Sense of humor.
 
Besides having any sort of R/C knowledge while posting in here we emplore everyone to have a good strong sense of humor in here as well. There are a lot of very bright people in here, and if anyone steps on their toes you can bet they are going to let lose on them. Reading through your old thread it was like a high school baseball player walking onto a Pro baseball field and were trying to tell the career ball players how to hit one out of the park. I believe what everyone is trying to say is that you are coming across a tad bit strong as if you are communicating with a bunch of 10 year old kids. We got your message the first time. YOU REALLY LIKE KRYLON FUSION PAINT. Good for you. Just because you like it sooooo much and shared it with us we must all run out and get some. We are happy to hear that a can of spray paint impresses you to the point of inevitable violent tendancies. I hate to say it but with your first thread you kind of placed a target on your own back with the way you tried to drive your point from the point of a new kid on the block. Just my 2cents but give it time to fade just a bit and take it easy. Everyone is just having a little fun with you now. Don't be a hater.

OH lets stay on topic, right??? Krylon Fusion paint sounds great. Thanks for the well informed advice Sir. Your video tutroials are the bomb. We are greatful to have such an authority sharing company secrets with us here on RCM. Way to go Dude. Sorry I could not help myself. Its kind of like when you go to a comedy show and you put your feet up on the edge of the stage. You open yourself up to a whole ton of jokes directed at you for trying to take the satge away from him. It's all good clean fun, right?? Good luck with that.

radioman193 09.09.2010 09:32 PM

over exaggerated remarks placed in the Proper places cause problems.
like
This one :
YOU REALLY LIKE KRYLON FUSION PAINT. Good for you. Just because you like it sooooo much and shared it with us we must all run out and get some.

and
We are happy to hear that a can of spray paint impresses you to the point of inevitable violent tendancies.
and

I for one am happy that you enjoy using . krylon fusion paint I really dont think that this needs to be drilled

and with sarcasm sutch as :

OH lets stay on topic, right??? Krylon Fusion paint sounds great. Thanks for the well informed advice Sir. Your video tutroials are the bomb. We are greatful to have such an authority sharing company secrets with us here on RCM.

And i only posted Just like you see here .
I did Not " Drill " the point

and replyed to the people that had a question .

and then you all started with the over exaggerated remarks and sarcasm.


eg
like if i sed the house is a good size...

you would say that i sed that the House is HUMONGOUS with 1500 rooms
and everyone shuld live there.

Just like you all have convinced yourselves that Im so in love with my truck
and that im telling everyone its the best thing on Plannet Earth.....

And thats untrue and So far from the fact.

Its just a Damn truck that does what it should not be able to do
in its current configuration.

Its all cool to make smart@$$ remarks
But EVERY remark like that is not cool.

TexasSP 09.09.2010 09:39 PM

Look dude, you got a rise out of Jerry which is no easy task. He's one of the most calm and level headed on the forum. Besides, you are in the general section not the tech section and all threads in general are subject to go all different directions and never stay on topic.

Just talk to freezebyte as he takes it all with a grain of salt. If you think we are "mean" go check out www.pirate4x4.com

They have an RC section too. :)

Seriously though, a simple thread with a few pics and krylon fusion worked great would suffice. However, a thread with constant font size and style changes with numerous pictures and 5 minute videos is rather excessive.

If you need a more friendly forum maybe you should give http://monster.traxxas.com/index.php a try as it is heavily moderated.

radioman193 09.09.2010 09:51 PM

i dont like that place im in there to.

it Dont bother me if things go off topic at all

i just dont like it when people go off topic just to attack me with exaggerations and repeted sarcasm.
as you can see here :
http://monster.traxxas.com/showthread.php?t=532432

i only see 4 of you that like do this with me.

But honestly.......... if you dont like me or what i talk about
Why Bother with my Threads and go out of the way to attack me like that
I dont know about you but i dont have time to sit and look for a thread or post of someone i dont like to trash them.
and there is Plenty i dont like at all but i just " IGGY " them.

Bushboy 09.09.2010 09:54 PM

Over half an hour of testing the bendabilty of painted plastic video's...
Gosh

Freezebyte 09.09.2010 10:01 PM

Quote:

Originally Posted by TexasSP (Post 379744)
If you need a more friendly forum maybe you should give http://monster.traxxas.com/index.php a try as it is heavily moderated.


PFffft, more like nazi moderated. :diablo:

radioman193 09.09.2010 10:18 PM

ok what about this one :

http://www.beatyourtruck.com/forum/s...USION-for-Rims

JERRY2KONE 09.09.2010 10:38 PM

Selective listening.
 
Besides having any sort of R/C knowledge while posting in here we emplore everyone to have a good strong sense of humor in here as well. There are a lot of very bright people in here, and if anyone steps on their toes you can bet they are going to let lose on them. I believe what everyone is trying to say is that you are coming across a tad bit strong as if you are communicating with a bunch of 10 year old kids. We got your message the first time. YOU REALLY LIKE KRYLON FUSION PAINT. Good for you. Just because you like it sooooo much and shared it with us we must all run out and get some.

I hate to say it but with your first thread you kind of placed a target on your own back with the way you tried to drive your point from the point of a new kid on the block. Just my 2cents but give it time to fade just a bit and take it easy. Everyone is just having a little fun with you now. Don't be a hater.


Your still not listening. Your still asking questions about why people are picking on you and I explained in detail why, and lead you in the right direction to make it stop, but you obviously have selective reading, and choose to see only what you wnat to see. You quoted items that you still want to make a point on, but you skipped right over the real problem here. You sound like a little kid in school asking "Why is everyone picking on me" and that is why everyone keeps pinging on your posts. It looks like you are having the same problem on all of your posts here and in other forums. Can you not see the real problem is the attitude your posts.

If one person tells you that your shirt is weird, tell him to mind his own business. If two people tell you the same thing, you may want to take a closer look in the mirror, and consider your options. If everyone is telling you that your shirt looks like crap, and still you choose to keep wearing it you are a fool and have no one to blame but yourself for the negative attention. Your posts are like that special kid in school that just keeps coming back for more after your classmates convinced you to walk up to the female teacher with your fly open and your willie hanging out. Just stop and it will stop. God the things you have to do in order to get through to some people??? We all love to come in here and have a good time. Let it go and think about the way you write your posts both in here and everywhere else, unless this is the kind of attention you are trying to drum up for your own self gratification.

radioman193 09.09.2010 10:59 PM

lol no im not................
TexsSP sed to go to one link
and frezzbyte sed :
PFffft, more like nazi moderated.

i found it>>> funny<<<..................

so i posted what I did to see what he would say about that place .
to get a good laugh as i did with the first one!

Dont look to find problems.
There will be no problems.

let it go as i have .

I Will NOT Go Away.
out of 50 years i have delt with worse things than this pointless drivel.

I just find it annoying...........

Freezebyte 09.09.2010 11:44 PM

Ok, seriously, about this thread...

http://i100.photobucket.com/albums/m.../wtfdv2dk7.jpg

radioman193 09.09.2010 11:46 PM

I dont http://myspace.drewpydraws.com/ccima...hitcaptain.jpg

I think it was the klingons again..

JERRY2KONE 09.09.2010 11:54 PM

Be happy
 
DONT WORRY, BE HAPPY. So back to the Krylon paint. Whats up with your post? Are you a Krylon salesman or something? Just kidding. Great tutorials although a bit long winded for my taste. Good to see that the long standing paint companies are still improving on their formulas and trying to make things better for us the consumer. Keep up the good work radioman.

radioman193 09.09.2010 11:56 PM

thanks

_paralyzed_ 09.10.2010 03:36 AM

IT WAS ALL LINC'S FAULT!!!!!

I have never used Krylon Fusion Paint. But I do plan to soon, especially after seeing how well it worked for radio.

I'm glad you are putting up with us yahoos radioman, we come on strong, but if you last through the initiation we adopt you as family. Heck, RCM even accepts perverts in wheelchairs!!:whistle:

Everybody else: Should we come on this strong with new posters? I don't care either way, just seems it might scare some away.

Side note: You can report things to the mods??:lol:

_paralyzed_ 09.10.2010 03:44 AM

and I found you a new avatar, from the movie "Radio"

http://i288.photobucket.com/albums/l..._/radioman.jpg

JERRY2KONE 09.10.2010 04:18 AM

What ever you do
 
What ever you do in here don't listen to Paralyzed aka-Harold. He will surely lead you in the wrong direction, and maybe even down dark allies where he can jump you from his chair. Just look at his avitar and you know there is something deeply disturbing about him. AND watch out for his right HAND man Lincpimp aka-James. They are in some kind of secret handshake gang together. I believe it is just the two of them though, because no one else has ever claimed that they know either of them. No one else is allowed in.

_paralyzed_ 09.10.2010 04:36 AM

thanks Jerry:lol: good stuff:yes:

JERRY2KONE 09.10.2010 10:12 AM

Just having some fun.
 
Quote:

Originally Posted by _paralyzed_ (Post 379789)
thanks Jerry:lol: good stuff:yes:

Hey Harold just having some fun. Glad to see that you see through my words my friend. I just received a couple packages today with a whole lot of goodies inside. I fell on a couple of sales that I just could not pass up. River sold me his full 2 speed titanium gear set for the Maxx. Very rare. Another guy put together a LOT for me full of stuff as he was on his way off to college including two full roll cages, and enough stuff for a roller with hopup gear.

Drivinfast247 09.10.2010 10:38 AM

This is great. :lol: Keep it up guys. :yes: I enjoy a good laugh. :rofl:

Bondonutz 09.10.2010 10:47 AM

Radio, Is that you in your new avatar or a clip from a movie or something ?

radioman193 09.10.2010 10:52 AM

its me

brushlessboy16 09.10.2010 11:01 AM

Holy crap i just read through the whole thread.. its rediculous.. krylon works great on bodies too, seen it done...



and to all the rest.

http://t3.gstatic.com/images?q=tbn:r...oryBro.jpg&t=1



Starting to remind me of 4chan...

Bondonutz 09.10.2010 11:04 AM

Sorry, I was thinking the pic was some sort of character from a Quentin Tarantino B-rated movie. That Mullet is Epic !

radioman193 09.10.2010 11:12 AM

hey i cut my hair myself and thats how it came out like a year agao.

That better............

well atleast my avatar aint Humpen a rc transmitter.:lol:

Freezebyte 09.10.2010 11:34 AM

Quote:

Originally Posted by brushlessboy16 (Post 379813)


Starting to remind me of 4chan...


http://i100.photobucket.com/albums/m...5673458152.gif

brushlessboy16 09.10.2010 11:36 AM

Quote:

Originally Posted by Freezebyte (Post 379818)

Dear lord not again!
:lol:

I just googled it

TexasSP 09.10.2010 11:38 AM

Speaking of which one week and three days till the new season of House starts!

I think Radio is finally catching on, pretty soon he'll be reading the lunch menu on the PA and getting his diploma.

radioman193 09.10.2010 12:32 PM

Hey why is my avatar NOT animated !!

it is a animated Gif.

http://www.frontiernet.net/~radioman193193/mt1.gif

I used Video Avatar v3.0.0.94 it make it with.............

radioman193 09.10.2010 12:53 PM

LOL LOL NOT!


i got it it was to big of a file.

radioman193 09.10.2010 01:26 PM

Quote:

Originally Posted by nitrostarter (Post 379826)
RC-M does employs a avatar gaydar. The gaydar was offended by the mullet pic avatar and has placed you on probation. It is only allowing you the opportunity to replace it with a more suitable picture only for now until the general consensus approves of the newer avatar. Then and only then it may be improved to an animated GIF.


it sounds to me like your a Pro at avoiding gaydar......
"by your wise words of wisdom"

That tells me that you Must have had alot of practice avoiding it yourself.


OOPS http://myspace.drewpydraws.com/maket...lename=241.jpg So http://myspace.drewpydraws.com/maket...ename=1gay.jpg


don't get your panties in a uproar now.....

http://myspace.drewpydraws.com/ccima...ture%20980.gif


All times are GMT -4. The time now is 06:53 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.