My BL-Savage
 

hello

here is my bl-savage , i made a motor mount for 540CXL , is lowdown motor.
i got 540C8XL to try and with a machine brake use 2-speed.

here is some picture.

47T/15T gears.
http://a12yunse.myweb.hinet.net/DSCF0476(001).jpg
http://a12yunse.myweb.hinet.net/DSCF0477(001).jpg

I have get some video is here.
ESC : Quark 125
Ext TVP
540CXL motor
14s GP4300 battery

http://a12yunse.myweb.hinet.net/savagebl.wmv

Here is my last complete motor with quark125
http://www.rcbig.idv.tw/bbs/rcbig/upload/8172-2-5.jpg

Here is someone with facilities.. :p

Did you made a support underneath the motor on the rear?

Topic moved to savage;

That looks like a good motor mount. LIke the idea of adjusting it without hard time. NICE!!!

Hello serum,

sorry i don't understand, what is "support underneath" mean?
mayby i think ,you mean the feigao motor can't hold to jump or bashing right?
thank you.

i think he means to support the back of the motor so the motor mount does not flex and change the gear mesh

That's right Cemetary!

Nice, I love your motor mount, must be really easy to change the gear mesh. If you fancy selling one of those, let me know.. :)

oh i understand.
this mount is pretty tight, i try to push motor back down, it seem like unflex i am use 7075alu bottom 8mm L.
but i worry is motor, if i use 540L not "C" i think motor front can't hold, if motor get very hot that glue will loose, this is my worried.

yes, this mount easy to adj mesh like engine, just only one sorry.

sorry everyone, my poor english, but i am very like here and share my Car.

Don't worry about your english!

you need or a bit of flex, or put it down tight on the back side, for the reason you are mentioning.

Supporting it is the best way, i think.

Thank suggest, i will to try next time.

by the way ,.
maybe this week me and my friend gonna try challenge faster Savage ... we plan use Castle Creations Phoenix 110HV controller with 29.6V or 44.4V Lipo on 1600kv motor,
we hope can get on top speed to 100KM or more......i am crazy..

that makes quite a difference with 12 cells nimh's. Savages are not built for speed. 44.4V will ruin that 1600kv motor.

Any updates on the speed project?

bad weather,
if luck, maybe this week.

i am ready radar gun and get DV, hope anything well be smoothly.

You are not living in the Netherlands for sure! hottest September since 100 years.. We had allmost no rain during the past month. (which is rather uncommon for us dutchies..)

Heh, this year seems to have been hot all over the world, here in the UK we had our hottest July in 70 odd years. Don't think it rained once. So glad I moved to the coast in June :)

Back on topic..very curious to hear what the results are when you manage to conduct a speed run.

What radar-gun have you got? the bushnell?

he all..
saturday, 6AM in the morning we first try CC HV110A air esc with 29.6v
, tooo bad
savage wheelie all the time at 1/3 throttle.
Here is video, top speed maybe 55Km to 60Km.
http://a12yunse.myweb.hinet.net/savagebl1.wmv

next time we try again it.

Yeah, that's the bushnell.

you need more room. LOL

so what did u think of the hv110? did you have problems with the pistol controler

i am use 3PK pistol controler,
it's simple adj TH relocate and CH3 brake. use 3pk MIX program you can easy
program your brake locate.
i think no problem.

HV110 or airplane ESC that TH neutral is lower 1ms start through 2.0ms full.
for car neutral is at 1.5ms ppm signal, i think can make something like micro chip MPU adj that ppm signal.

thank you.