My jammin X1CRT video
 

hi
here is my CRT truggy video for speed run.
used M1 6S2P pack, and 1900XL motor, quark 125.
top speed agv 85kph ..
i think next i want try over 100kph maybe..

http://www.youtube.com/watch?v=NgCxjq4awVY

Thank you...

It looked to handle the speed well. Could you swap system from savage to
crt and try a speed run.

nice and fast, looks nice from what i saw:)

Damn dude! Very fast. Nice truggy! Hope your having fun.

yes i will swap to ccHV110 to this truggy soon.

here is my option mod, i made a hard steel 14T gear with X1CR buggy 48T spur.,
not any problem.
and i made a ESC plane can help it cool like heatsink.

Wow that was fast! The CRT looks good :027:

Josh :028:

Thank you..

for this project BL CRT, i am made complete part,
Battery box can put M1 cell and E-moli cell.
motor can put 4x4 2 fan, look like this:

Very nice. Looks like you have access to some fancy sheet metal forming equipment. Looks like a very neat and clean job.

new speed run.

today my X1CRT so close get in 60MPH.. come to 96Km/h..i am so happy.
here is my setup.,
HACKER C50 9XL
46/17 gear
M1A123 6S2P
Quark 125 with mod 4 caps.

here is new video : http://www.youtube.com/watch?v=ZfkAGpwhB-Q

Wow, very fast!! Nice job.

Big truck for those speeds! Nice Job!:027:

Cool!!!! Was that 6s lipo?

Ya ~~~~
My CRT today speed run come to over 60MPH speed.

here new video.
http://www.youtube.com/watch?v=HM5UvmiRccg

NOw for the 110 kmh. :D

great Andy! what cells/motor did you used?

Oh, i am so hard to try.

used 6S2P M1A123 battery (2.7-2.8V pre cell) and Hacker C50/9XL with 46T spur 18T gear and 6inch tire.

Quark125 can't take 6S Lipo , so i am try hard to gear up.
test and test , try keep quark esc cool down.

Quark not good for 6S, tooo bad.

i like speed run , i will keep try how faster my CRT... yes just CRT.

The motor you are using is not a Hacker C50. It is a B36-74XL with fins.
Attachment 3011

long time ago i abandon B36, B36 motor is shix.
now i use C50 in my hand.

Good choice. I have a few Hacker C50s myself. Really good motors. I was using a Kontronik FUN600, but that went bad fast.

Impressive!!!
This quark takes it 6S
http://www.rc-monster.com/proddetail...RK_125A&cat=21
Have you got other photos about your car ?