Goin' Dual Mamba Max 6900 in E-Maxx
 

Will have this project finished in a few days as soon as second Mamba 6900 system comes in.

That does sound cool, but why? A single XL can motor will do the same thing, if not more on less juice.

Y not?:)

Welcome to the forum!

because a single XL motor is cheaper, stronger and more efficient.

Nice Tonka you've got there..

If your racing or just bashing, single is the better route to go. But if you've got no budget and are looking for a fun project to rip up and down the street with, then go duallies! Lot's of torque! Just make sure your whole drivetrain is beefed up. Keep us updated.

one single XL will outpreform a dual 6900 Johnny!

Yeah, and will be cheaper and lighter too.

Welcome Gandalff!

Hope the two "sync" well for you. That would be my major concern. Two motors fighting each other would be hard on equipment & run times.

With two controllers you don't need to worry about being out of sync Barry. Unless they are turning in opposite directions.

Are you sure serum? Both controllers would need exactly the same programming files at a minimum or they would in fact "fight" each other even if only minimally.

It's a rather smooth motion, the turning; one low RPMs it might affect on or the other, but it's not as essential to have a perfect timing as with 2 motors on 1 controllers. The MM (or any brushless controller suited for our applications) uses software that enables it to turn from a minimal amount of RPM's. The MM is the slowest turning esc i know. still more than a ~120rpm start though. (guess)

They are not fighting eachother, since you have got inertia from the magnet. They are not endless fast in response to the magnetic field that powers the rotor.

Same programming goes without saying.

Opposite directions would be an interesting experiment :)

I'll get the camera Daf.. Hang on..

I'd pay for the spur, and make it a steel one :)... but who donates the motors and ESC?? :027:
LOL don't forget the dual eagletrees


Sorry for the Hijack, Mithrandir.

Dual Eagle tree's! Perfect! Would love to see the current graph after that one!

Agreed, he should have gone dual XL's.:027:
Procharged, I've never had any "sync" issues with my dual XL's or dual 9L's. Smooth as butta. :027:

Good to know!

When I suggested dual Mamba Max 4600's for my Supermaxx I received numerous "Don't do it" responses from the RC-Monster Collective, so I went for the NEU1515/Mamba Max.

That's why I was raising the red flag.

I gues it's not a problem, so ... nevermind! :010:

I don't view it as so much a problem, as less than practical. Of course, practical is not a word that I see used very many times on this forum.

Practical is boring!

Everyone here like to break new ground! Push the envelope! Let smoke out even!

:005:

I just want to try it. If it does not work I can put the motor systems in something else. Maybe a bl dual motor 4-tec :eek: I will find use for them.

Wish it were mine. Saw it on addicted2rc.com had to have the pic.:dft001:

Yes, yes, and NO. Letting smoke out is BAD. :)

Amen!

Please let there be no smoke.:007:

Btw. Thank you for the welcomes.

welcome to the fourms!

did u get ur mm's yet?

Still waiting for one MM, and a bunch of stuff I ordered from the store.

well what bout now? lol

i wanta hear how she does

Nope not yet. When I twist the cvd's out of it, I am going 3.3 specs.

I want to see the vid and pics, but Serum has to wear the Anteater costume

sorry had to say it:005:

Do not worry i will post vids

lol, i hope so

Cool!! I like to see video as well. It should work ok.
May not be the most efficent. It get the job done. :D

Can you take a video of it with the single 6900?

Maybe:027:

Waiting on the U.S.P.S.
 

They still have my motor and I am getting impatient :031:. B-P-P says if I do not get motor Tommorrow They will ship my order again tommorrow afternoon. In other words wait for the fist order to come in.

Thanks for listening to (reading) my mini rant. B.B.

The USPS can be slow at times. And frustrating!