New XT8 almost done
 

http://www.photoshopshowcase.com/SAN...9D3999E29B.jpg
http://www.photoshopshowcase.com/SAN...8A508FDCA0.jpg
http://www.photoshopshowcase.com/SAN...77D07179E9.jpg
http://www.photoshopshowcase.com/SAN...ACE46FE8C3.jpg
http://www.photoshopshowcase.com/SAN...BD0426ECCF.jpg

Here is a quick video of my new xt8 (not moving):

http://www.youtube.com/watch?v=tjWz6c1-kYI

I hope to have it running this weekend!

we like 'm nude dude..

ya, I wanted to keep it simple, I may add a few stickers. I ended up using RIT dye to color the rims black, white didn't cut it.

I think he meant - lose the lid :lol:

lol


Sick truggy...

ya, I got that after I posted, funny, I will, just wanted to do a little more on the inside...

Come on, don't be shy.............................Take it off!

< WAVES DOLLAR BILL >

Lets see it!

:lol:

You guys are wrong......

I got a couple bucks....

I do like the preview though, she looks nice even with clothes.

Ok, after offering money, I built up the courage. I will use the money for an upgrage :)

http://www.photoshopshowcase.com/SAN...BD2E1F902C.jpg
http://www.photoshopshowcase.com/SAN...5B585E0E74.jpg
http://www.photoshopshowcase.com/SAN...0FA47701CC.jpg
http://www.photoshopshowcase.com/SAN...4FE95255D6.jpg

Specs:
NeuMotors 1515/2.5D/F
Quark 125B (I have the mgm 16018 as a spare ESC) Mike made me a mount for my ESC, hard to see in the pics, but it works good!!
16/48 all metal (I have other gears to run, and may get teh 46 spur)
5S 6000 PolyQuest 20C
Diff oil 7/10/7 (spare center with 20)
Weight 10lb 5.8oz, the 5S 6000 makes it heavy, but I run in the same I will get 4S if I race on dirt.

Here is my spec sheet:
http://forum.teamxray.com/xform/inde...=223&setup=xt8

how much does the 5s 6000 weigh

788 g / 27.80 oz

--


The FlightPower LiPo 14.8V 4500mAh 30C EVO30 4S is 478g. The 5S is 593g.

Since I don't race offically, I want more runtime, and sand is soft.

very nice!!

very nice!!
I finished REVO Bl recently.
CC, 7XL, 4s (4000, 5200), BEC…I am at a loss with XT8 or 8ight t with the next machine.
However, I am not readily available in Japan.
It is very enviable. .
very good job ^ ^

Get an inferno or something^

Looks nice. funny thing is, after getting you to strip, I like the body the most.

VERY nice under that body!! WooHoo!
Is it very rear-biased with the motor and Quark up the back?
I do like those XT8s- I strugglestruggle to choose the next victim to mod up....

hey, it is not that fat...

I drove it for the first time this weekend, and I need to run it some more to really tell. The fact is, that with all of the options you can change the weight from back to front many ways, so I would not worry about it. I can say that my first 30 minutes with it, it handle very very well, I was able to accelerate after the corners, the front tires dug in fine. To be honest, on one long corner the back end did come around (could be me and the throttle), so I have to figure out why, but on very tight corners it handle perfectly.

inferno & HB LSP-P very NICE!
but The finish is very clean＆luxurious xt8!!!
It is not good that I can easily buy it.
In other words, because anyone can easily buy it.
Therefore that I chose REVO BL expressly＾＾
I am not a racer.
There is not the circuit near, too.
But I feel joy while touching it with a car.
The aim earns money within five years and wants to make a circuit.

wow, looks great. i like that paint, and the clean, no stickers look. looks just as good under the skirt, too! oops, i mean body.