anyone have experience with the maxamps 10000mah packs?
 

has anyone used the 10000mah packs in an 1/8 conversion... what are your thoughs... i'm thinking of using a 5s... they have a low c rating... i'm looking for somthing to last at least 45min

You need to pass them up, too heavy and not worth the cost. Go with the 8000 truerc packs, much better value and will fit better as they are smaller in size. I had a few 10000 packs and was not impressed at all.

I bought lincpimp's 10000 packs and I wasnt very impressed either. I just wanted to try them out and see how the runtime was performance etc. My 5s2p TrueRC pack has been great so far. ll these driveshafts keep snapping. lol

I have a pair of 10,000mah packs that are 45mm wide X 135mm long. They are about 35mm thick. Each one weighs 17 oz. Pretty heavy.

The pair would run my Revo for almost an hour straight of hard running. But the extra weight is hard on the drivetrain and does tend to slow it down somewhat.

The ones I have do put out really good power. 100amps continous with 150 amp burst. These aren't lacking on power.

I've been thinking maybe the best use for these would be in a boat. :yes:

i'm just not a fan of 2p packs at all... its either the 10000 or 5000 pack...

who make the best high capacity cells in a 5s config

Flightpower, or neuenergy

They are good for what they are, but I was not very impressed for what I paid for them. Overpriced and they are 10c cells. 100amps is a bunch of power, but the batts are a bit heavy for my liking.