Gorilla needs a lid
 

Folks, what's a good body for a Gorilla chassis? Something that sits looooow. I'd like to cover the batts.

I have my Crowdpleazer at the lowest position possible. I modified the body posts, and it sits almost directly on the shock towers, but still, the batts are almost a full inch below the body.

Or are there some kind of low profile shock towers.

I like my MT Racers LOW!

Dafni i use the f350 extend body from proline. It's mounted al the way down. I extended the sides with a sheet of lexan . I used 4/40 buttun head screws to connec t it to the body.