Newest Addition... "Cen Matrix TR Arena"
 

Just got it yesterday and got it all converted. I ran it on 4s to start today and it was hitting around 45mph with a decent amount of torque. I plan to run the FP 5s tommoro on this setup to see what a difference it makes. I also plan to get the Medusa 36-60 2000kv V2 AB motor. Should work like a champ with the setup I plan to use...

Here is my current setup...
Mamba Max ESC
Ammo 36-56 2600kv Motor
FlightPower 3300mah 4s 25c Lipo


Future Setup...
Possible MMM ESC
Medusa 36-60 2000kv Motor
FlightPower 3200mah 30c 5s Lipo

Heres a vid of it running on 4s today- http://youtube.com/watch?v=tyb9xtfhiy0


Only pic I got right now...
http://i301.photobucket.com/albums/n...ownRCU/035.jpg

GPS, radar? Sure didn't look like it to me in regards to the speed or torque.

In the video I was only going 3/4 throttle due to the camera lying on the ground. Im getting another video today on 5s.

Make sure u locktite EVERY metal on metal connection, my raze vibrated out kingpin screws..... not fun at 45.. :)

Ya everythings secure BB. Pretty excited for my new MM to come today. Gonna mod it.

what are you going to do to it besides a fan and cap board?

Im running an 8-cap board and no fan. The MM hasnt gotten above 131 degrees yet.

mine is about the same, mine was at 165 after a full pack

Yeah mine got up to 131 after a hard run on 4s. Ill see how well it does today on 5s.

yah it should be the same exact thing.... it would suggest that im putting my power system through the same stress as yours, leading me to beleive that the setup is close to optimal.

Cogging is almost non-existent.. Is it just me or is the MM's startup routine in reverse smoother then that of forward?

Yes reverse is smoother. It also has to do with punch control and start up power.

Nice Addition, be sure to post up off body shots

Will do.

DItto on the pics. Might want to move this to the Truggy forum??
I debated between this and the Hellfire, but ended up with the Hellfire just due to the lower cost of buying the roller.