5mm bore drive cups
 

Does Mike sell any 1/8 drive cups with a 5mm bore? I know he sells ones with an 8mm bore.

Thanks

IIRC, the ones that come with mip cvds for the maxx trucks have a 5mm hole in the center and will work with std 1.8 scale dogbones.

I use these ones and haven't had a problem yet. Traxxas #5153, $7.69 a set.

Thanks guys, those Traxxas ones look good.

Plus, you can use the blue traxxas dust boots if you go with the traxxas drive cups. They are pretty durable, too!

Traxxas 5153
 

I just found out the hard way that Traxxas # 5153 drive cups are 6mm bore not 5mm! Don

OK guys does anyone have the part #'s for Mugen or Xray 5mm bore drive cups? Don

Dogbone Cups.
 

You can still purchase dogbone drive cups from UE. I just ordered and received some 5mm, 6mm, & 8mm cups from UE, and they are heavy duty if you need the strength.

Time to show my ignorance-who's UE? Don

Unlimited Engineering - originator of the Supermaxx and Lightning. The drive cups are listed on this page. They are hardened for minimum wear. I use them also along with a lot of their other drivetrain stuff.

http://www.unlimitedengineering.com/...AHrwBE3N&open=

Take a look around - you'll see their stuff mentioned, won't hurt to be aware of who/what they are.

Thanks! Went there-good looking stuff. Wish I'd have known about them before I ordered the Traxxas ones. Don