![]() |
Will My setup Work Properly?
Finally have made my list on what I plan to get and run in my Cen Matrix truggy. I will be running a Mamba Max ESC with the updated firmware, Medusa 36-60 1600kv or 2000kv motor, FlightPower 3200mah 30c 5s lipo "Might Be getting a 4500mah 6s soon". I am wondering how well this setup will run? Will their be any heat issues or noticable cogging if programmed properly? I want to be able to start from a standstill and run about 3 or so mph and not notice any cogging and not to have any heat issues at all. Is this possible and what settings would you reccomend?
|
I hope you mean the Mamba Monster and not the Mamba Max.
The max is only rated for 3s and people can run 4 or 5 but that is pushing it. The Monster is rated for 6s right out of the box. |
No sadly I meant MM. I will most likely stick with 5s for my MM and 6s for my upcoming MMM.
|
The MM WILL NOT run on 6s!
|
Theirs nothing like trying it out first hand.
|
dont count on the MM to run on 5s, I am not familar with the Medusa's, with 4s I would go with a Neu 1515/1y (2200KV) or a 1515/1.5d(2700KV), the 1y if you want a happier running system or if you want to race, the 1.5d if speed is more important to you...if you need to run the 5or 6s I would go with the MMM, if it was me I would just go with the MMM and do what ever you want.....and with 5s I would go with the 2d and 6s the 2.5d
|
Good luck frying your MM then. Not to be rude but it wont hold up to it for long. Just go with the Monster.
|
Ive ran the 5s on the MM with my cap board and it ran very nicely. Got to 148 degrees after a hard run and I feel 100% safe running it. I will for sure be running it on 5s.
|
5s you might get away with but i wouldnt go 6s. But... you do as you feel jsut let me know how it turns out for you.
|
Will do... As of now I desperately need a new motor... Fried the ammo.
|
Quote:
get a Neu.....there is a cliche "You buy cheap you get cheap" |
The medusa motors arent cheap at all. Its $110 for the one Im looking at and their suppose to be neu quality material.
|
Quote:
|
All Im saying is you shouldnt be bashing medusa motors if you've never tried one first hand. I have high hopes for mine when I order it.
|
I run my mm on 5s and its fine, but overvoltage kicks in when the pack is fresh...
|
| All times are GMT -4. The time now is 08:56 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.