Fried Quark 125B
 

I had just installed some new gears in my G3R Revo and some 1/8th diffs. I had previously been running stock diffs with 16/52 gearing. When i first switched to 1/8th diffs i ran the same gearing as before and was jumping it off the dirt pile at Monster Mikes! It was running great and staying cool. Came home and ran it till the packs died which was around 25min. I than installed my new gears which were 22/46. I charged up my 2 2s 5000mah Neu Power packs and put emm in the truck and she was ready for some speed runs on the road! I brought her out there and did about three passes and she was running good. After 1.5min - 2min passed i checked the temperature (with my finger) the motor was cold and the speed-o was a little warmer than before which was to be expected. So with that done i kept running and went for about another 3min when the brakes locked at full speed and sent the truck flipping through the air about 10 time to land back on its wheels! I walked over to check her out when she started to smoke! That was the end of that fun!
So if anyone can help me get in contact with Quark to get a replacement that would be great!

Thanks, Trever

SKY Technologies has been absent lately in the states so good luck with your search, DickyT had the same problem he fried his 125b, I would just write it off as a loss and go with an MMM or since you are running 4s you could get away with a MM

yeh that might be what i have to do but im gunna at least try to get a new one so i can sell it and just make a little money back! So if you can help me get in contack with any one in the states or even over seas that would be great. I am in no hurry as i am going to buy a MMM any ways!

oh and by the way! How do you like your MMM? Do you think it will handle the set up i listed? Thanks

u can try arkinnovations in australia? they sell them and offer good support.

do you have there contact information? Thanks for the help!

as long as you dont go over 6s it can handle anything you could throw at it