Novak brushless kit
 

I just had to buy one to see what's in it. I hope they sell the battery holders separately

http://www.volcano.net/~desmotwin/pi...b/CIMG4047.JPG
3s2p maxamps
http://www.volcano.net/~desmotwin/pi...b/CIMG4048.JPG
2s2p maxamps
http://www.volcano.net/~desmotwin/pi...b/CIMG4049.JPG

http://www.volcano.net/~desmotwin/pi...b/CIMG4050.JPG

http://www.volcano.net/~desmotwin/pi...b/CIMG4051.JPG

http://www.volcano.net/~desmotwin/pi...b/CIMG4052.JPG

Did you buy the rest of the kit? If so can we have some pics...please:whistle:

I got side tracked before I took more pic's. I'll get some more tomorrow.

The battery trays are right and lefts too by the way

I WANT SOME! bet they are going to be expensive, and they wont fit my a123, but they are exactly what i need... and $100 for mike to do them custom is just too much (for me, but not for his time or products!!!

They do look nice, do you have to drill holes to mount them to the chassis?

The press release for the conversion kit replacement parts should be going out this week. The battery boxes will be sold as a pair, since they are right and left. I believe that the LP for the pair is about $50.00.

They look ok, but it looks like the length will limit your choices to 140mm and under. If that's the case, I'll just keep using traxxas battery holders at only $10 a pop. If I need a longer one, I'll buy mike's.

50.00 a pair is too much for thin plastic holders. Maybe the street price will be less. They do look good, I'll see how they hold up in my elst

Looks like a nice tray. I'd like to see the rest of the kit, too.

Did you know there is a huge cut in the insulation of the positive lead on your 2s2p? :oh:

I noticed that myself when talking the pictures

http://www.volcano.net/~desmotwin/pi...b/CIMG4059.JPG

http://www.volcano.net/~desmotwin/pi...b/CIMG4060.JPG

http://www.volcano.net/~desmotwin/pi...b/CIMG4061.JPG

Tray's mounted on my elst. They include hardware for mounting and a post or one end so you can use a body clip to close them. I used longer bolts so my huge 3s maxamps will fit.

http://www.volcano.net/~desmotwin/pi...CIMG4063.1.jpg

http://www.volcano.net/~desmotwin/pi...CIMG4064.1.jpg

http://www.volcano.net/~desmotwin/pi...CIMG4065.1.jpg

Very nice!

The material used to make the battery boxes and straps is glass-filled nylon, not plastic.

I noticed when I installed them that they are not plastic. They are very nice, just alittle spendy.