Are there any cogging issues w/ MMM and Neu?
 

Im debating wheather I should get MMM/Neu or NOvak HV system. thanks..

I take it you'll be running a 4s pack since you're considering the Novak system? What vehicle will it be used in? I haven't seen/heard of any issues but there are many MMM/Neu users out there. IMO the Novak systems are not powerful enough for a MT/Truggy. That depends on how you drive I guess. But ANY MMM/Neu combo will easily be twice as powerful as the Novak. Even at only 4s.

why wont the Novak HV have enough pwr? Im planning to use it in the E revo. its seems to be fast on the videos. Yes, I could only do 4S. Maybe I should spend extra and get the best. MMM/Neu. thanks..

Definitely.

MMM runs the Neu's smooth as butter. It also ran my Align 600xl 6 pole motor smoothly too. Easily twice the power output of the novak and much more efficient.

Do you guys have a link for the MMM/Motor combo at tower? also, is the quality of the motor same as the Neu motor? who makes it? CC or Neu? thanks

If you want some numbers, the Novak systems put out 750 watts (1HP) peak. The only advantage I see to a NoS is that thy are sensored and therefore easier to control at LOW speeds. But who drives slow these days? :mdr: If you were doing nothing but racing on a tight track where you wouldn't see speeds of more that 35mph then I'd say get the Novak.

OTOH, MMM/Neu can easily make 1500 watts (2HP) peak or more AND be more effiient while doing so. It means you need better batteries, too, so plan for that. A pack that can dish out 80-100A continuously would be alright.

Like this: http://www.rc-monster.com/proddetail...=PQXP4s500025c

and then this motor for racing: http://www.rc-monster.com/proddetail...512_2dF&cat=20

for bashing: http://www.rc-monster.com/proddetail...15151ys&cat=20

for uncontrollable speed (the way I like it): http://www.rc-monster.com/proddetail...5_1.5dF&cat=20

Cogging? I think not :) http://youtube.com/watch?v=zdJaYMj2e-w

neu 1515 1y, MMM, TrueRC 5S 8000 mah lipo.

Mine didn't even cog with the 600xl and that's a 6 pole motor. I crawled around with it very slowly and everything was very smooth.

I haven't had any issues with my MMM with Cogging

Ran a 1515 2.5D while my MMM was alive, smooth as butter.

MMM/2.5d video
 

http://s300.photobucket.com/albums/n...t=bb8df352.pbr lets see a novak system now. anyone?