Power Supply Question
 

Last month, I bought an E Revo and some 7 cell SPC packs for it. I have an ICE charger and a 12 volt 10 amp power supply.

I like the truck a lot, but dont like to wait two and a half hours for the batteries to charge. My ICE is a great charger, but it cant do two batteries at once. I was looking for a Dual charger that can charge lipos and I found the Hyperion EOS0610i DUO.

I plan to buy this charger, but I dont know if my power supply will be able to supply enough current for charging two packs at once.

I figured that my power supply is capable of delivering 120watts of power (12v*10A=120 watts).

To charge one 7 cell NiMh pack at 4.6 amps, I would need about 39 watts (8.4v*4.6A=38.64 watts). For two packs I would need about 78 watts.

Based on these numbers, my power supply would be powerful enough right?

Thanks for reading this

-Brad

Those numbers work in my head. So long as the charger itself is rated for more than 80watts, I see now problems.

Thanks for the quick response Neil. The DUO is capable of 180 watts per port, so I should be fine.