RC-Monster Forums - What type of pinion for E-REVO

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)

- General Questions (https://www.rc-monster.com/forum/forumdisplay.php?f=7)

- - What type of pinion for E-REVO (https://www.rc-monster.com/forum/showthread.php?t=14363)

crazysavage

08.18.2008 07:35 PM

What type of pinion for E-REVO

Could someone help me on pinion type for the E-Revo please. I ordered mod1 and 32P with 5mm shaft opening. Will one of these work with the E-revo spur gear on an NEU motor.

Arct1k

08.18.2008 08:48 PM

Yes - Use brians calc to work out the right size - gear for 35-40mph for track and maybe +5 for bashing...

http://www.scriptasylum.com/rc_speed/index.html

azjc	08.18.2008 09:13 PM

Quote:

Originally Posted by crazysavage (Post 203141)

Could someone help me on pinion type for the E-Revo please. I ordered mod1 and 32P with 5mm shaft opening. Will one of these work with the E-revo spur gear on an NEU motor.

you will use 32p or mod .8...they are the same

crazysavage

08.18.2008 09:29 PM

Thanks again for the help guys.

e-mikey

08.19.2008 06:49 AM

You should probably pick some up in the 18 - 21t range.

crazysavage

08.19.2008 09:39 AM

Quote:

Originally Posted by e-mikey (Post 203313)

You should probably pick some up in the 18 - 21t range.

Thank you, I will be putting the Neu 1512 df in the truck and I was under the impression that this motor was somewhat high in the rpm range for the E-revo and since I was going to be running the MM until the MMM comes out, I opted for 14 tooth with the 61/62 on the spur. Will this make the truck a wheely monster? I would rather see 40+ mph than wheel stands.If you think I can safely turn 18 to 21t I'll pick some up.

e-mikey

08.21.2008 07:46 AM

Use BrianG's calculator but... I have the stock pinion in my e-revo, and have the 1512/2.5d. I think with a 22t pinion I would be around 40.

All times are GMT -4. The time now is 01:28 PM.