![]() |
thinking about a BL boat purchase
In the past 2 weeks I have become very interested in BL power boats, I have done lots of research and instead of buying a bottom level RTR, I am thinking about buying a used boat. There is a BL boat club and one of the big retailer/boat builder is in my area. I have found a 10s lipo RTR and have seen a similar one in action and they only have about 5 mins of run time but its 5 mins that will drop your jaw....its is pricey @ $1400
here is the link http://forums.offshoreelectrics.com/...ead.php?t=4598 |
Man, that is an ugly boat!:lol:
Seems like a good deal, quite a bit of money in the motor and esc. Fastest I have run a boat is 45mph, and that was crazy. I know you would have fun with the boat. I have seen the hulls up close, and they are well made. An older design but still works well. If you get it post up some better pics of the hardware... |
"built by Fine Design in the end of the 2006 season."
^^^ I think I have found a reason why this boat hasn't sold from the link above. |
Bigger is faster. Mono's are the funnest...stick with the race hulls 30'' is nice but the 33'' hulls are rated for about 10 mph faster. The 33'' titan looks real nice and you might be able to run your truck gear in it.
|
get a boat!!!they are very fun!!!...this is my BONZI 50"gas!http://i302.photobucket.com/albums/n...s/IMG_1363.jpg
http://i302.photobucket.com/albums/n...s/IMG_1364.jpg http://i302.photobucket.com/albums/n...s/IMG_1365.jpg http://i302.photobucket.com/albums/n...s/IMG_0324.jpg.....runs for an hour,you get tired before the boat! |
Quote:
http://drcwebservices.com/ffe/images/335asdm.jpg I was thinking a 1527/1y w/ 8s lipo would push it nicely.....:yipi: |
the second boat looks much better!(very sleek)....the $1400 one looks well used!.....i prefer NEW!...then you know what you are getting:yes:
|
Is it me trippin, or me not knowing much about the boating world.... but is the prop on reverse in this pic or is this the way they are supposed to face???
http://i302.photobucket.com/albums/n...s/IMG_1365.jpg Nice boat btw =) |
the prop only goes on one way!...i had to go take a look myself!....there is a small notch in the prop where it connects to the shaft:mdr:
|
-lol- sorry to scare ya - i did notice that notch, although still wasn't sure - i just remember from my 6HP tinnie days when i was a kid that the prop faced the other way to what it is in the picture =)
I couldn't help it - i did a google image search and all the props face the other way? http://www.swissmodelpowerboatteam.c...04/CT04_15.jpg But it looks like it's the right way round in this shot? http://i302.photobucket.com/albums/n...s/IMG_0324.jpg i've seriously confused myself -lol- |
Beautiful bonzi bro! I wanted that exact same boat for so long. I still may wind up with one but will have it converted to brushless power so I can run anywhere any time plus I have 4-5s 6000mah packs coming out my ass so run time won't be a factor. But my advise to any first time boater is grab a mono hull right around 30-40''.
|
the prop is a very interesting design.....it came on the boat!.....the pics are an optical illusion!
Get a BONZI 50".....http://bonzisports.com...only about $2G RTR with custom paint and modified Zenoah |
CHECK OUT THIS BOAT ON EBAY!
http://cgi.ebay.com/Pro-Boat-BlackJa...QQcmdZViewItem |
What a trip that sent me on -lol-
i have really wanted one of these for a long time now - just never had the money to get one started being i'd most likely need dual power systems... HPR 06 Cat hull... http://www.swissmodelpowerboatteam.ch/115er.html There's the Toysport jolly cat i was looking into at the time too =) http://www.offshoreelectrics.com/pro...?prod=TP-Jolly I have a 600mm B-24 mono hull on 12 cells and a lehner xl2800 i used to play with, but it needed some serious hardware upgrades so it's been packed away for a while, so i kinda forget it exists... I must say tho - boats are a hell of a lot of fun =) Check some of the vids here... the 3rd one down has DUAL 3080 lehners! http://www.swissmodelpowerboatteam.c...site=guestbook |
those vids are sick!
|
| All times are GMT -4. The time now is 02:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.