Which Feigao for a crt.5
 

Mike is out of the 4800kv Medusa motor I want so, for now, which Feigao...I am looking for around 4000kv.. give or take...

Why not order from impakt?

Go for a 3300 anyway - 4800 is a bit quick...

On 2S I would think a 3300 would be a pretty slow unless you can gear it way up.

Differential Ratio: 3.25
Transmission Ratio: 1
Other Ratio: 1
Spur Tooth Count: 46
Pinion Tooth Count: 18
Total Voltage: 7.4
Motor KV: 3300
Tire Diameter (inches): 3.93
Tire Ballooning (inches): 0
Motor Current Draw: 0
Motor coil Ω: 0
Spur/Pinion Ratio: 2.56 : 1
Total Ratio: 8.30556 : 1
Tire Circumference (inches): 12.35 inches (313.6 mm)
Total Motor Speed: 24420 RPM
Vehicle Speed: 34.38 mph (55.22 km/h)
Estimated Adjusted Speed: 33 mph (53 km/h) - 4% loss

Thank for the info...Mike has the 3300 in stock so I will place an order...:mdr:

I could always order the 4800 Medusa and the 3300....just because..:whistle::whistle::whistle:

Just go for the 5mm shaft...

Those are my plans!:yes: Thank you for your input...