|
Puffed lipo by shorting?
Hi guys,
I got a Neu 3s 5000mah lipo the other day. I was soldering deans to it and accidently touched the two wires for a split second. it made 3 sparks. Basically i am asking if i have ruined my new lipo. i think it has puffed a bit but it could be my imagination. many thanks |
very well could have damaged it. I don't have any first hand experience but from what I've seen on here a quick touch generally doesn't damage them.
|
If only for a split second you should be fine - Remember the spark you get when you first plug in a battery to an ESC - This is like a short as the Caps soak up the voltage very quickly.
I'd be suprised if you've puffed it - Check your voltage on all cells. Post up a picture... But be careful! Not worth buring the house down... Dupe post - http://www.rc-monster.com/forum/showthread.php?t=14988 |
again sorry for the dupe post. you can delete the other one or wotever lol. i'll try and get a pic of it. i actually bought 2 of the same lipos, so this is why i think it is puffed because it feels squishy on top and the other one is solid.
|
What charger / balancer setup do you have - does it have built in volt meter? Do you use a lipo sack?
|
these are brand new batteries. never been charged or used. im new to electric so im not really sure what is considered a puffed lipo. ive taken some pics so i'll try and upload them
|
Quote:
|
any thoughts? i know the pics arnt very clear. should i send it back to Neu? they sed i could, but im not sure if it is considered puffed. it just feels squidgy and the other one feels solid.
|
Send it back Rev:-o, I gather from your posts on Traxxas you dont have a esc, motor or truck yet, so you have some time. If Neu said they'ed take it back, send it back and consider it lesson learned
|
i think i'll take your advice jayjay. the only thing is ive soldered deans to it. but if they ask i can just say the shop i bought it from did it for me. www.flydma.com do it anyways
|
It doesn't look puffed to me. I'd run it!
|
What charger / balancer setup do you have - does it have built in volt meter? Do you use a lipo sack?
What are the voltages on each cell? |
it should be fine , i have done the same thing
|
i've done the same as well when i soldered deans to my 2s 5000mah tp lipos....only a split second of sparks....i ran it til LVC, charged it back up and nothing was wrong with it :yes: you should be fine...:rofl:
|
| All times are GMT -4. The time now is 05:05 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.