need help pls!!!
 

hi guys, i'm from Hong Kong and just got an E-Revo few days ago...well, i got a Tekno 1515 1y/f and a mgm 16018, just wondering if this setup is OK,or NOT??? btw, i'll use two 8.4v(7cell) eastpower 4600 batteries! thanks

Should be no problem at all for that esc and motor.

thanks mkrusedc!!! btw, if i'm just going to use two 7 cell(4500mAh) eastpower batteries(NO LIPO FOR ME CAUSE IT'S TOO DANGEROUS!!!), how fast you think it'll be??? and since i'm still waiting for the USBCOM+ to be in stock, is there anyway to program the MGM 16018(except to use the radio program cause it's kind of hard and it take too long for me)!!! also, what i need to order for the 16018 programming beside the USBCOM+ and the CC-02 CABLE??? thanks again for your time and help!

Go to http://www.scriptasylum.com/rc_speed/index.html. Click on the speed calculator.....it will give you more info than you need.

Those are the only cables needed. Search this forum somebody posted an easy to read explanation on how to program it using the transmitter. I have only used the cables so i can't help with that. good luck.

I found it. read the first post.

http://www.rc-monster.com/forum/show...ht=program+MGM

thanks alot guys, will try that and see what's up!

the only problem i see is that you will be over taxing the batterys alot

seems fine, just you may want to upgrade the batts, soon... they will heat up as fast as you can start a nitro!! LOL

OK guys, will think about the batts upgrade!!! btw, my E-Revo will be a HR Version(Hot Racing)! well, i'm almost done with it, and when i'm all done with my E-Revo.....i'll post some pics up the forum!!! anyway, thanks again for all the time and help from you guys! best regards!!!!!!