mugen conv
 

i just picked up a sweet deal on a mugen mbx5t roller( gave up on the rc8t $825 canadian was a bit much lol) and i am going to start a conversion, i ordered the rcmonster motor mount and battery tray and ordered the rcpd center diff cover now iam looking at motors
the motor i have been looking at is a medusa 60mm 2000kv motor i beleive it is mr-036-060-2000v2-5, is this a good motor for this truggy sorry for the questions but i am new to this lol also are the hyperion litestorm batts any good i am looking at the vx4350-5s ones thanx for all your help this site is amazing

scott

The motor will be very fine on 4s, crazy on 6s.

The lipos.....I've got no idea, but I surley recommend the flightpower anytime.

Scott, welcome! As for the batts...Flight power and Poly Quest have Enerland cells which are the best. If you can afford them, they are the best.

Another alternative are the Zippy li-po....http://www.hobbycity.com/hobbycity/s...3&v=&sortlist=
Many members here use them w/good success.

Good luck!:yes::yes:

thanx for the help guys, i am going to wait for castle to bring out there esc and motor combo or the monster mamba and a medusa motor and will be going with the 2200kv motor, what batteries would be better to get 4s or 5s they will be around 4or 5000mah and what balancer would you use with the zippy packs, i will be using the hyperion eoso606i charger thanx again

FYI: The Hyperion packs are enerland cells as well.

thanx bl_rvo i am trying to get as much info as i can lol

another question guys i can get a deal on a new neu 1512 1y s motor, would it be ok in my truggy i will be running it on 5s most likely if that matters thanx for the help

scott

Some guys here will run the 1512 in their truggies, but most prefer the 1515 due to the x-tra weight of the truck

Looks like both of us will have an E car for Tillsonburg!! Eh Scott. My Xray and your Mooogen! I like this site, guys for friendly and willing to help out some NitroHeads!! :lol:

hey calvin yeah this is a great site, lots of great info

Personally, I'd get a 1515, and if you go with the 1512, don't get the 1y, too high KV.

i run the 1515 2.5d motor on 5s its way more then enough power:intello:

Most don't stay "nitroheads" very long once they get a taste of real BL power. :smile:

yup i agree i drove jhautz buggy and truggy and the next weekend i was selling everything that had to do with nitro:party:

i like it for the plug and play factor i am sick of driving my truggy for a day and taking 3 days to clean it lol, also the no tuning part of it hopefully our series up here lets me run with the nitros:mdr:

scott