9xl 4s lipo 5000 ez run esc in e maxx good?
 

Would this be a good set up in a e maxx. gearing 23/66?

Does anyone know how to JB weld the front and rear end bells on? Pictures would be greatly appercated. Thanks!

Are you talking about the eZRun 60A? I don't think it'll handle your set up. Have you seen this ESCs? I use it in my other Recoil which is 1/14 scale. People have used the 60A in 1/10 scale, but with 3S max and a 380-540 style motors that comes with the combo.

iv seen it in a e revo on the exact set up ran fine

Was it the eZRun or was it the Xerun 120A? Hobbywing makes 2 different ESCs.

60a esc

Where did you see this set up? I would love to see if the ESC is stil working.

its on youtube type in EZ run 60a esc

Very interesting. I guess GriffinRU was right about the capabilities of the ESC. He still has mine that I sent to him to get fixed and he might even do one of his cooling mods.

What cooling mods?

60amp really isn't enough. You can pick up MM ESCs now for around $100 and run the 9XL without a problem on 4s.

Go to youtube and type in EZ run 60a esc. You will be surprised.

If you've seen some of the work GriffinRU has made you'll know he knows a bit about cooling some of this devices. He's the guy who did the Mamba Max and R1 mods for better cooling efficiency. He was actually surprised on how well built the 60A esc was and he said he could improve it some by doing one of his copper cooling mod.

Thats cool. So the esc is built really well. Thats good to know. Do you have to buy the programing card to use the controller or can you use the esc with out it?

All the ESCs Hobbywing sent me came with the program box, so they should come with one too. I haven't tried to program the ESC without it. You can also program the setting by just following the simple instructions. It's as easy as holding the program button and following the LEDs.