Or a reason to open the Case!
 

Tried to run my brand new Monster V2 in my Revo Conversion.
Plugged in the Battery (5S) little Spark and..... nothing.No Light,no sound.
Measured the switch and it was ok. Then I diceded to open the Case and saw that. Look for the black wire!

Ok resoldered the wire and now it runs like a champ (Firmware1.2)

One item less to shipp from Germany to CC :party:

Good thing that it was an easy fix that you could do yourself!

-Brett

Looks like the switch must've been tugged on pretty hard during packing or something as that wouldn't get through quality control. Glad you got it fixed and running though. :smile:

No i dont think it was done by mechanikal stress. It was not soldered right.
It was a cold Solder joint.

Regards
webwiesel

Poor QC standards.Yea I said it.

Qc??

Quality control QC

Nice picture -- I can read the WO # off. So now I'll track down who soldered it, and who in QC passed it.

We'll find out who did it. :whip:

Uh oh! Someone's in for it! :oh: Let me know if a position opens up.... :lol:

I wouldn't want to be either the solderer or the QC guy who did that...:oh: :lol:

Oh boy!! Look out!!!

:lol:

:neutral: :whistle:

On a more serious note. I have to say its great to have a manufacture here to answer our questions and listen to our rants. Thanks


Webwiesel have you soldered it up and ran it yet??

someone is in trouble.... :)

Webwiesel have you soldered it up and ran it yet??[/QUOTE]



Hi

Yes but alot of rain here in Germany so i ran it only a min or so to test it -> works perfect


Webwiesel