MMM 2200kv Combo ships....
 

Got an Email from castle. They are waiting on the motors. Should be in stock a week or 2. So i believe they will ship then :-)

PS. 21/51 pinon/spur on 4s and 1/8 diffs will do fine on an E-maxx? what about 5s?

:wink:

has anyone found where the motors can be ordered seperately

me too i want one:yes::whip:

Sweetness

This is great news. I can finally retire my Feigao and throw away my temperature reader. I think you can only get the motors in the MMM combos though. Hopefully there will be some nice Christmas specials on those.

if you plan to throw it away. throw it my way :-P

anyways has any one got advice on the 21/51 pinion/spur if this will be ok on 4's?

21/51 would be nice speed (43 mph), but i think 51 Spur is too little and the motor could hit the transmission (maybe in the High GC holes), and where did you find a 51T Revo Spur?

Differential Ratio: 2.8461538461538463
Transmission Ratio: 1.8333333333333333
Other Ratio: 1
Spur Tooth Count: 51
Pinion Tooth Count: 21
Total Voltage: 14.8
Motor KV: 2200
Tire Diameter (inches): 5.8
Tire Ballooning (inches): 0.1
Motor Current Draw: 0
Motor coil Ω: 0.006
Spur/Pinion Ratio: 2.43 : 1
Total Ratio: 12.67216 : 1
Tire Circumference (inches): 18.85 inches (478.78 mm)
Total Motor Speed: 32560 RPM
Vehicle Speed: 45.86 mph (73.67 km/h)
Estimated Adjusted Speed: 43 mph (69 km/h) - 6% loss
Effective KV Value: 2200
KT constant: 0.61 oz-in/A

Nylon 51 tooth spur gear - Ofna
http://www.rc-monster.com/proddetail.php?prod=ofn30110

I've got UE diffs so the trans ratio is 3.31

would the below be ok?

Differential Ratio: 3.3076923076923075
Transmission Ratio: 1.7222222222222223
Other Ratio: 1
Spur Tooth Count: 51
Pinion Tooth Count: 21
Total Voltage: 14.8
Motor KV: 2200
Tire Diameter (inches): 5.8
Tire Ballooning (inches): 0
Motor Current Draw: 0
Motor coil Ω: 0.006
Spur/Pinion Ratio: 2.43 : 1
Total Ratio: 13.83455 : 1
Tire Circumference (inches): 18.22 inches (462.82 mm)
Total Motor Speed: 32560 RPM
Vehicle Speed: 40.61 mph (65.23 km/h)
Estimated Adjusted Speed: 38 mph (62 km/h) - 5% loss
Effective KV Value: 2200
KT constant: 0.61 oz-in/A

You'll be okay. I'm running 51/20 on my gmaxx using a strobe slipper setup with UE 8 spider gears.

ok, so no problem then, I was thinking about an E-Revo and the E-Revo transmission that have problems with low Spur gears.

Maybe you may add a little tire balloning to the calculator, if you tape the tires there's a little balloning too.

I want about the same speed for my E-Revo when Combo arrives, for me 20/54 about 40 mph, 4s, for the track.

thanks thats good news. Looks like i run a similar setup bar the pinon and the 6s.