MMM V3 success
 

Ran my first pack on my Emaxx, 7XL, geared 20/68 on 4S SPC lipos. Just AWESOME. Originally my BEC went out on my first V2 so I ran an MM in the mean time. MM handled great and I must have run it 20 or more different times while waiting for my V3 to come back. The new software update on the MM was impressive. Put the new V3 in, ran with stock BEC, got rid of my wiring mess, programmed with my Airtronics 2.4 gig radio and bamn. I'm in business again. Thanks guys. :party:

Temps were 123 motor(with heatsink only) and 102 MMM in 66 degree weather after 15min of continuous start and stop.

Thats great to hear! My V3 is running flawlessly as well. :yes: Enjoy the ESC! :wink:

Sweet, enjoy your emaxx

I tried my second run this morning. I was a bit harder on it and in temps of 60 degrees the motor was at 145 and the MMM at 118. The fan didnt come on at all during the run. I have already surpassed my run time on my V2 with basically the same setup by over double.

I received my v3 last night. I threw it in my mbx5r and have put a pack and a half through it. flawless so far!

me too...all my v3 run great!! close to 5 hour on each unit(5):whip::whistle:

so all my v3 run great ...but the fan of one unit come to life only at 125f but all my other v3 the fan begin to spin at 90f????why????