My Crt X2 Conversion W/pics
 

WELL GUYS I'M JUST ABOUT FINISHED WITH MY FIRST BRUSHLESS CONVERSION ...SOME SPECS..
CRT X1 CONVERTED TO X2 WITH SMALL CENTER DIFF CONVERSION & HB RING & PINION CONVERSION
NEU 1515 2.5D/F
MMM V2 UPDATED TO V3 ESC
NEUENERGY 5S 5000 LIPO
RCM MOTOR MOUNT AND BATT. TRAY
GEARING NOW IS 46/15
AIRTRONICS 94359 STR. SERVO
SPEKTRUM DX3R RADIO GEAR
...STILL NEED TO FIGURE OUT WHAT TO DO WITH THE SWITCH AND PROGRAM ESC AND CHARGE BATTS, TILL I CAN RUN HER....I CAN'T WAIT
SOME PICS...BODY IS THE NITRO ONE TILL I PAINT UP A NEW ONE WITHOUT ALL THE CUTOUTS
http://i164.photobucket.com/albums/u...version001.jpg
http://i164.photobucket.com/albums/u...version002.jpg
http://i164.photobucket.com/albums/u...version003.jpg
http://i164.photobucket.com/albums/u...version005.jpg
http://i164.photobucket.com/albums/u...version004.jpg
http://i164.photobucket.com/albums/u...version006.jpg
http://i164.photobucket.com/albums/u...version007.jpg
http://i164.photobucket.com/albums/u...version008.jpg
http://i164.photobucket.com/albums/u...version009.jpg
http://i164.photobucket.com/albums/u...version011.jpg

i would say nothing, it looks beautiful, excellent job sir

Beautiful! Same color as my crt.5...nice choice...:yes:

Very nice. Where did you buy that ESC mount?

THANKS GUYS....
.....The ESC mount is made by r/c product design

Mike also made them but they never made the store :(

i wish Mike had sold them ,I really like the quality of the RCM products...i spent a lot of time with a file and deburring to finish it off a little bit nicer

Very very nice man

is that an x2 body?......if so will it fit on my x1?

I have the same electronics as you 1515/2.5d with Monster but I'm running 6s
absolutley awesome truck and power that runs nice and cool

take a look

VIDEO

Thanks bustitup ...It's a JCCONCEPTS X1 body that i had already for the nitro set up when it was a X1, but i was surprised how well it fit the X2...I have another new JcConcepts body that i'm gonna use without all the cutouts for the nitro stuff till i can find the new Proline Switch x2 body, they look sweet...Awesome vid by the way,thanks for posting that

Very well done!!

Excellent job! Very clean.

Very nice. Are you talking about how to mount the switch?

thanks guys for the replies....
....Driftbuggy ...yes ,i'm not really sure where or how i'm going to mount the ESC switch

do you need to have it? cut off the wires and solder them together.?

thats what i did on both my mm's alot easier to deal with imo as i never use the switches