other powerfull 1/8 esc
 

i know that lutach have made a tread on it but now all the specs are avalaible

interessting but how reliable???anyway this brand seem to be good...(i use the 35 amp version and nothing wrong to say!!)


http://www.hobbywing.com/english/Art...?ArticleID=429

I went to that link to check out the scpecs and was infected by: JS/SillyDlScript.FO

My antivirus cured the infection but I'd figure I'd let others know

How odd, I too was looking at that earlier today. Looks quite nice actually and has sensorless & sensored motor support etc etc, but until someone feels brave and buys one (where ever they end up for sale to as Hobbywing dont sell direct), we just wont know... :neutral:

hmm...it came up the first time, but the second time it told me some malware tried attacking y computer through some BS .exe crap....cuz macs have .exe files....:na:

I get that when I go to hobby wing as well, avast aborts that connection for me though.

.dk

I don't even see the full page. My AV must just block suspect content...

dammmm!! sorry guy's my pc dont see that sh&*% $*():oops:

Here you have:

Picture (safe):
http://www.hobbywing.com/upload/car/ezrun-150A.jpg

Manual (safe):
http://www.hobbywing.com/upload/manu...Run80A150A.pdf


1 Specification

1.1 Output: Continuous current 150A, burst current 1080A.
1.2 Input: 6-18 cells NiMH/NiCd or 2-6 cells LiPo.
1.3 BEC Output: 5.75V/3A (Switch mode built-in BEC).
1.4 Resistance: 0.0002 Ohm.
1.5 Motor Supported: Sensorless and sensored brushless motors
1.6 Suitable Brushless Motor: 3.5T and > 3.5T
1.7 Suitable Car: 1/5, 1/8 on-road or off-road cars / trucks for competitive race.
1.8 Size: 68mm(L) * 55mm(W) * 45mm(H).
1.9 Weight: 150g(Without wires)


2 Features

1.1 Compatible with all sensorless brushless motors and most of sensored brushless motors such as Novak, LRP and Feigao, etc.
1.2 Excellent start-up, acceleration and linearity features.
1.3 3 running modes (Forward only with brake, Forward/Reverse with brake, Forward/Reverse immediately)
1.4 4 steps of maximum reverse force adjustment.
1.5 Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
1.6 9 start modes (Also called “Punch”) from “very soft (Level 1)” to “very aggressive (Level 9)”.
1.7 Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
1.8 8 steps of timing adjustment by software.
1.9 Built-in switch mode BEC has a powerful output to supply all the electronic equipments.
1.10 Easily program with only one button and compatible with pocket-sized Program Card.
1.11 Firmware can be updated through an USB adapter (Optional equipment).
1.12 Splash proof and dustproof.

thanks:yes:Maciolus now when are the release date:whistle:

4S, 80A version is avalible:
http://cgi.ebay.com/EZRUN-13T-Brushless-Motor-2300Kv-80A-ESC-Program-Card_W0QQitemZ170288860492QQcmdZViewItemQQptZRadio _Control_Parts_Accessories?hash=item170288860492&_ trksid=p3286.c0.m14&_trkparms=72%3A1205|66%3A2|65% 3A12|39%3A1|240%3A1318|301%3A0|293%3A1|294%3A50
with strange 81.5mm x 46mm motor

Ewww! Both the motor and ESC have fans.

http://www.rc-monster.com/forum/cust...vatar444_8.gif http://www.rc-monster.com/forum/cust...vatar444_8.gif http://www.rc-monster.com/forum/cust...vatar444_8.gif http://www.rc-monster.com/forum/cust...vatar444_8.gif

:lol::lol::lol:

so i cant wait for testing the 150amps unit:whip:

...and the price

i bought a 80a esc from this on ebay but for now i am still waiting for it..
i will use it on a e-revo with a feigao 9xl and 2lipos of 2s 3000 in serie..

regards

How long ago did you order it?