Looking for a oddball inrunner
 

Ok, I have a project that needs a weird motor. Dimensions need to be like a std 540 brushed motor, so 36mm diamter, 50mm max length (preferably shorter) with a 25mm mount pattern with m3 thread, and a 1/8 shaft.

Now for the special part. I would like a 6 pole motor, and a kv somewhere around 1500. Now anything from 1000kv to 2000kv will be useable...

Something capable of about 300watts would be desirable.

So get to if fellas! I know some of you can find just about anything...

the pimps drinking again, we best find him his motor or we are going to get dildo wacked

Something like this would be cool, but needs lower kv...

http://www.hobbycity.com/hobbycity/s...trunner_2900kv

I have a 5mm brushled
motor that could bull a truck out of an alligator pond, Snowman 78 ? sorry if off sent it to me i wen brushless, 720 id say no identity on it but big fooker

art attack snowmobile, not sure if its it but its 2x any emaxx motor ( brushed bitch)... its huge you need it $5 as usual check this dog out

Oh yeah, double-ended too!

I will pm you in the am... Later than now... I am sure that I can find a use for it!

rated 35a 11.1v (388w) shorter than a 540, but with a 5mm shaft(i know a guy that can have it turned down for you)

http://www.puffinmodels.com/product.php?prod=818

woops, its 12 poles. popped up on a 6 pole google. I'll look again.

Here you go, this meets all criteria except for the 3.2mm shaft part, this one has a 5mm.
http://highendrc.com/index_eproduct_...products_id=50

12 poles is ok, looking for a torquey motor. I may go down to the 22/10/8 as it is around 1500kv and shorter. The can length is my main spec I have to meet as space is at a premium...

Bit too long, but thanks!

I think based on dimensions you are going to put a motor in place of diff cup?

No but that does sound cool...

It is going in my 6x6 tlt axle based crawler. Tight squeeze with the links and driveshafts.