My Xray XT8 truggy BL conversion
 

Finaly I got Mamba Monster combo and made conversion to my XT8
Yesterday I raced with that and it ran realy good!
Here some pics.
http://www.hot.ee/tom255/xray/DSC_0112.JPG
http://www.hot.ee/tom255/xray/DSC_0113.JPG
http://www.hot.ee/tom255/xray/DSC_0120.JPG
http://www.hot.ee/tom255/xray/DSC_0122.JPG
http://www.hot.ee/tom255/xray/DSC_0139.JPG
http://www.hot.ee/tom255/xray/image002.jpg
http://www.hot.ee/tom255/xray/image003.jpg
http://www.hot.ee/tom255/xray/image005.jpg
http://www.hot.ee/tom255/xray/image010.jpg
http://www.hot.ee/tom255/xray/image011.jpg

Did you custom make the esc and reviever mount? it looks sweet!

Very nice conversion

How did your new Castle motor run

:gasp: wow looks great!..:yes: I lke the mod you made to the battery box, what are you running 2x 3s = 6s or what??:whistle:

Actualy all parts are custom made and designed by self. I have CNC.
Battery box made from derlin and all aluminium parts from 6061-T6 grade.
Castle motor runs realy nice but bit hot imho its have too much torque for my taste but a little bit play with trottle expos and hight torque now under control.
I run for now a 4S lipo. And motor temp is 56C=~132F with ambient 3C=~35F after 10min of race.
Trugy was geared to ~42mph by top speed estimator. I need to buy smaller pinion to gear´it for lower speed, its too much for our local winter track
Batteries are used Zippy-H (5000mah 4S) and Zippy-R (2x2500mah 4S in parallel)
Full RTR weight is 4410g=~9.7lbs

Great conversion. the truggy looks little heavy at left side, maybe you can place smaller LiPo pack at right side to balance the chassis?

Very nice and clean conversion.

:great:

Nice to see another xt8 around here. Nice job on the build.