RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   HPI Savage (https://www.rc-monster.com/forum/forumdisplay.php?f=30)
-   -   savage 21 BL Gearing ? w/ HV-MAXX 6.5 (https://www.rc-monster.com/forum/showthread.php?t=18891)

gehweb87 02.19.2009 03:04 PM

savage 21 BL Gearing ? w/ HV-MAXX 6.5
 
Hi, I just got a hv-maxx 6.5 to put in my savage 21 and was thinking i should run 12/51 just wanted to get your opinions on gearing. the truck is stock just a x radio box, hs-645mg,rims, 25 springs, ect.. about 12-14lbs. I got a KD plate to mount it. oh yeah i'm running 12cell nimh.

I also have a 49t spur and a 13t & 14t pinions.

MTBikerTim 02.19.2009 11:27 PM

I would start with the lowest and see how it goes. Keep an eye on the temps of the esc motor and batteries and go for it.

traxxasbasher13 02.20.2009 12:29 AM

Try 13/51 to start with. If everything runs cool like MTBikerTim says gear it up a little.

gehweb87 02.20.2009 01:16 PM

thanks for your input sounds like i'm on the track.:yipi: I will start low and see how hot it gets. What kind of speeds do you think i will see (30-35mph?). Also what kind of battery holders do you guys use.(i have been looking at the flux ones)

Out with the nitro:party::yipi::party:

gehweb87 02.20.2009 02:19 PM

Here is a pic of the 21 thats getting the hv-maxx 6.5.
http://i350.photobucket.com/albums/q...87/savage1.jpg


All times are GMT -4. The time now is 12:22 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.