Integy Knuckle question
 

Where can i find the plastic pillow ball caps for the integy aluminum knuckles? thanks

Rc-Monster, They are 3racing ones, ask Mike ................

Mike also has the aluminum ones with the o ring on them. I put the aluminum in with loctite. So far no problems.

i use the stock ones with locktight on them. I think i put to much locktight on one cause now i cant un screw it lol! If i try anymore its gonna strip the hex.

If heat it up don't the loctite lose some of its hold. You may want to try it. If you have to get it out.

i tried to heat it up with my soldering iron but it didnt work lol. its ok though i dont need to take it off.

If you run it long enough the knuckle may decide to fall off. :L:

Or you can try a blowdryer:p

do you have a link, i still can't find them. I Pm'ed mike a couple of days ago, he must be taking the week off.

Aluminum O ring caps If that is what you looking for. Mike can get them Just have to wait for him to get back.

HAHA yeah that would be my luck! i've had 3 wheel nuts come lose in the last two runs, also the steering servo screw(lucky it didnt get lost!). Its funny cause that last two times my dads had a turn the wheel comes off lol. he'll be driving around then the wheel will come off and roll away lol. So i've put lock tight on them now, hopefully they will be able to come lose when i want them to.

lol i would but me and my mate fried the last one. the cord had a cut in it where it connects with the blowdryer, and i told him to plug it in and turn it on(he didnt know about the cut) and there were heaps of sparks and a big bright light, and lots of sizzle noises lol. we nearly wet ourselves laughing lol. Sorry thats a bit off topic.

Thank you, but i'm looking for plastic caps. Plastic caps i believe are better (for aluminum knuckles) b/c they don't jam. Thats why ue's suspensions use platic caps as well. The are the ones ue sells, but i'm not sure if they fit the integy:
http://www.unlimitedengineering.com/...ore/13108.html

Do you know if the ue ones fit the stock knuckles? cause the integy knuckles take stock size caps.

I don't know, maybe someone on the forum can try out an old stock cap on their supermaxx knuckle.

i have supermax pillow balls and they are the same size as stock ones so i guess the caps must be the same also.