RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   General Discussion (https://www.rc-monster.com/forum/forumdisplay.php?f=20)
-   -   Traxxas 1/16th's Info Released (https://www.rc-monster.com/forum/showthread.php?t=20086)

skellyo 04.09.2009 11:24 PM

Traxxas 1/16th's Info Released
 
http://www.traxxas.com/products/prom...7108_promo.htm

Always Dreamin 04.09.2009 11:26 PM

Sweet! it is also in their catalog. There is a bunch of info on it... It looks like a very nice truck, but for the time being, my rc18 will have to do. Looks like they are also listed in the "products" section of their website. Avaliable may 14...

Metallover 04.09.2009 11:34 PM

Sounds like they did the diffs right... Does anyone else notice something wrong with the 15th slide?:lol:

skellyo 04.09.2009 11:36 PM

Quote:

Originally Posted by Metallover (Post 278135)
Sounds like they did the diffs right... Does anyone else notice something wrong with the 15th slide?:lol:

LOL...power wiring into the plug is backwards. Good catch!

Metallover 04.09.2009 11:40 PM

Quote:

Originally Posted by skellyo (Post 278136)
LOL...power wiring into the plug is backwards. Good catch!


Let's all hope they don't make them like that!:lol:

I think with dual batteries a sweet setup would be a 4s flightpower. Hopefully the battery trays will fit the flightpowers and most other good lipos that are 100-110mm long. 4s lipo with a medusa or neu would... Test the diffs for sure!

Can we review the release date and price?

Always Dreamin 04.09.2009 11:55 PM

Release date is May 14. Prices are pending (not listed on any site I've found)

BP-Revo 04.09.2009 11:56 PM

I was thinking of stuffing my Lehner 1930 in there...maybe I'm just insane...:neutral:

And perfect timing. I know what I want for my Birthday!

lincpimp 04.10.2009 12:10 AM

Those diffs do look solid. Now I am torn between the mini slash and revo... I think I will take the mini revo. Do they list battery tray dimensions yet? Looks like their packs are 6 cell 2/3a packs. So a pair of 2s lipos like that in parallel would give stupid long runtimes, and I am sure that it could be geared to get around 35 out of it with 2s lipo. That way the internal bec could be retained, and temps should stay low. At least it has 48p gearing, and I bet the motor shaft is 1/8, so std pinions will fit...

jhautz 04.10.2009 12:30 AM

I am so all over that mini revo its not even funny!:intello: Where do I order from. I want to get a stock "mini revo" class at my local track. Imagine running these things on a full out 1/8 scale track with 10 or 15 of them on the track at once. Total blast!!!

BP-Revo 04.10.2009 12:49 AM

Linc, I was planning to do 3S in parallel, but that's me. And yes, I want one NOW!

lol

Always Dreamin 04.10.2009 01:07 AM

3s would be a sweet setup!

jhautz 04.10.2009 01:08 AM

It says the esc will take 12 cell NiMH so its gotta be able to take 4s. Probably doesnt have a LVC profile for 4s though.

Always Dreamin 04.10.2009 01:53 AM

If the limit is 14.4V, and 4s is 14.8 that wouldn't work, right? I like how they went back to the simple NiMh. An honest speed claim right there!

jhautz 04.10.2009 01:56 AM

That was the limint on the Mamba max too..... But we all know that didn't mean anything. I was running the MM on 5s lipo for a long time.

Besides, 12 cell NiMH peaked is almost identical in voltage to 4s fully charged.

Always Dreamin 04.10.2009 02:11 AM

That is true.. I wonder if it has a LVC built in... i mean, it comes with a NiMh, so I wonder... No doubt people will push it, if it is anything like the 1/10 version, it should be a killer.


All times are GMT -4. The time now is 01:01 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.