$70 120a esc
 

Found this at hobbycity, anyone know anything about it?

$70 USD
120A max 240A burst
2-6 lipo
Forward, Brake (none, soft, hard), Reverse
Timing control
LVC (adjustable)
Built in BEC

Doesnt seem to have throttle curve adjustment or punch control...

http://www.hobbycity.com/hobbycity/s...hless_Boat_ESC

http://www.hobbycity.com/hobbycity/s...arine-120A.jpg



Heres an 80A 12s (!) esc for $80 USD.
http://www.hobbycity.com/hobbycity/s...hless_Boat_ESC

http://www.hobbycity.com/hobbycity/s...arine-80HV.jpg


Another steal... $110 100A 12S - great reviews too.
http://www.hobbycity.com/hobbycity/s...2S_BESC_(Ver4)

http://www.hobbycity.com/hobbycity/s.../TR100A-HV.jpg


80A 6S programmable brake/throttle - $48
http://www.hobbycity.com/hobbycity/s...rogrammability

http://www.hobbycity.com/hobbycity/s...og/HXT080A.jpg

there boat esc's, meaning that they wont calabrate to a pistol radio.... I think...

turnigy=tenergy??


Constant Current: 80A
Burst Current: 180A
Resistance: .0007ohm
Battery: 5-12S Lipoly
*BEC: Nil
Motor Type: Sensorless Brushless
Size: 94 x 33 x 18mm
Weight: 81g

*:rofl::rofl::rofl::rofl:



also, music on the lipo cells??:rofl:
http://www.hobbycity.com/hobbycity/s...idProduct=2169

1) Marine ESC. Read as: "Unless you water-cool it it will overheat."

2) The Sentilon is an AWESOME ESC if you have mechanical brakes.

3) If the lack of a BEC is the only problem, what's the problem?

Dont see whats funny, using an external ubec or Rx pack reduces space and heat on the esc. Thats a GOOD thing!

Didnt realize the sentilon doesnt have brakes... that sucks it seemed like a keeper. Even with a fan the marine controllers overheat??

Using an externam BEC is besides the point on a marine esc.. as you can see it has no heatsink and will overheat as stated.

Oh no heatsink... duh didnt catch that. You could always add one, wouldnt be hard to do with a thermal pad and small HS. Definitely worth it.

its just how they worded it...


so will it calibrate to a pistol radio??

NIL! Idk if it'll calibrate, why do some controllers have trouble with pistol grips?

Not without a pistix adapter.


its not worth tryig to remove the water cooling plate from the esc and install your own.. just get a mamba max and mod it. same results with better parts support.

I suppose you could flood the cooling tubes with thermal paste and then add a heatsink to the top of them... :whistle: It's not the *best* solution but it would work if there is a flat surface under the heatshrink.

:neutral::neutral:


IDK, but I might pick up one of those hextronic things, I'v got a nasy habit of frying esc's before I race:oops:

I thought people were getting these to calibrate with pistol radios. Just gotta go through the steps........ I'm going to search.....

Well, it was a nice thought! I cant tell if the hextronics has a heatsink..?

The HexTronik has a heatsink. It's that thin aluminum plate held on by the heatshrink... :lol:

DOES NOT NEED PISTIX

shame on you, Ben for writing untruths

Search people!