RC-Monster Forums

RC-Monster Forums (https://www.rc-monster.com/forum/index.php)
-   Castle Creations (https://www.rc-monster.com/forum/forumdisplay.php?f=34)
-   -   another dead mmmv3 (https://www.rc-monster.com/forum/showthread.php?t=20431)

e-mike 04.25.2009 01:14 PM

another dead mmmv3
 
yes.:grrrrrr:after only 7 min...my e-revo stop and nothing else do do with it


this esc was brand new(warrenty return)ive got it this week and today i just installed in my revo testing it:whip:....no luck...it died....arffff

again back to cc!!!!!

my set-up

e-revo
16/68
flightpower 11,1x2 25c
5955tg
bowtie tire
castle neu

it was 78f outside.motor was 112f,lipo106f esc 108f

magman 04.25.2009 01:39 PM

Sorry to here this....seems to be a run of dead mmm's lately

Snipin_Willy 04.25.2009 03:06 PM

Another one bites the dust,
Another one bites the dust,
And another one gone, another one gone,
Another one bites the dust!

Sorry for your misfortune, I'm missing out on this weekends race :(

e-mike 04.26.2009 05:53 PM

ANOTHER DIED TODAY:diablo::grrrrrr::slap:YES GUY'S 2 MMMV3 DIED THIS WEEKEND:surprised:...SAME SET-UP BUT DIFFERENT TRUCK....

IT DIED JUST TO PLUG MY LIPO PACK AND POUFFFFFFFFFFFFFF BIG SMOKE COME OUT DIRECT IN MY HOUSE!!!!IM REALLY &*%$$*&?*()...(DONT REALLY KNOW THE WORD IN ENGLISH TO EXPLAIN MY FRUSTATION!!!)

MY SET-UP IS
E-REVO
NEU 2200KV(REAL NEU)
2X11,1VOLT 4500MAH 30C
5955TG
DX3S

Pdelcast 04.28.2009 06:19 PM

Quote:

Originally Posted by e-mike (Post 282496)
ANOTHER DIED TODAY:diablo::grrrrrr::slap:YES GUY'S 2 MMMV3 DIED THIS WEEKEND:surprised:...SAME SET-UP BUT DIFFERENT TRUCK....

IT DIED JUST TO PLUG MY LIPO PACK AND POUFFFFFFFFFFFFFF BIG SMOKE COME OUT DIRECT IN MY HOUSE!!!!IM REALLY &*%$$*&?*()...(DONT REALLY KNOW THE WORD IN ENGLISH TO EXPLAIN MY FRUSTATION!!!)

MY SET-UP IS
E-REVO
NEU 2200KV(REAL NEU)
2X11,1VOLT 4500MAH 30C
5955TG
DX3S

Mike,

How about you return that Neu motor along with your second MMM that failed. We need to check to be sure you don't have a shorted winding.

Thanx!

e-mike 04.28.2009 06:28 PM

Quote:

Originally Posted by Pdelcast (Post 283018)
Mike,

How about you return that Neu motor along with your second MMM that failed. We need to check to be sure you don't have a shorted winding.

Thanx!


thanks Pdelcast for your reply!!!this is the first thing that ive thinked that my motor was my issue...but im running my last monster(mmmv1esc)for about one year with this motor:yes: i just remove the mmmv1 for testing my new esc....so i dont really know why the v1 hold pretty good and 2 v3 died in 2 days....but if you want i can ship you the motor...im really addicted to castle products and i take always care of my mmm this is why i dont really know what happen

Pdelcast 04.29.2009 11:18 AM

Quote:

Originally Posted by e-mike (Post 283026)
thanks Pdelcast for your reply!!!this is the first thing that ive thinked that my motor was my issue...but im running my last monster(mmmv1esc)for about one year with this motor:yes: i just remove the mmmv1 for testing my new esc....so i dont really know why the v1 hold pretty good and 2 v3 died in 2 days....but if you want i can ship you the motor...im really addicted to castle products and i take always care of my mmm this is why i dont really know what happen

We'll test your motor here and check the back-emf, just to be sure it's not an issue with the motor. It's pretty unlikely that you got two bad MMM in a row, so I just want to be sure. A short on one winding will sometimes run OK, but will damage the ESC over a couple minutes.

Thanx!

e-mike 04.29.2009 05:21 PM

Quote:

Originally Posted by Pdelcast (Post 283212)
We'll test your motor here and check the back-emf,

Thanx!

this is what im doing right now and no issue at all...im just srcared about the fact that my 2 units could it be not covered by the warrenty:cry:i have certainly 10 monster esc return for warrenty repair the guy's who work at the repair departement should recognize me easely and said noooooo not again...the canadian guy's...arfff im to unlucky:oops:


All times are GMT -4. The time now is 10:37 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.