![]() |
Help with Revo
i currently have the Tecko convertion in my 3.3 and was running an 8xl,i just bought the MMM-2200 setup and it wont fit the mount(to big around)can anyone tell me if the RC-Monster mount will work with the 2200 motor?if so what gearing should i run?I am thinking centre diff and rear brake setup as well
thanks |
yes, the rc monster motor mount will work with the 2200kv motor. thats what im using.
|
have you beefed up the driveline?
ya know..things like locked it into 2nd gear and removed 1st, E-revo diffs and steel center driveshafts etc? yeah the RC-monster mount will work shaun |
[QUOTE=shaunjohnson;284471]have you beefed up the driveline?
ya know..things like locked it into 2nd gear and removed 1st, E-revo diffs and steel center driveshafts etc? yeah the RC-monster mount will work shaun[/QUOTE the tranny is locked into 2nd,i have cvds all around and in the middle,i didnt know about the diffs though.thank for informing me of that. I am switching over from the tecko kit so i wont be using the clutch bell any more.so what is a good gearing to start with?I will be racing not bashing so there will belots of 20-30 min mains and i want to keep her cool as i can and run somewhere around 30-35 mph my maxx is geared for 30 and stays nice and kool thanks for your help guys,i will order the mount now |
a racer like me then...:party::yipi:
get some E-revo diffs at the least, center diff with some really heavy weight diff oil (the nitro revo center diff is a little too weak for my taste) IMO i like what i have done and used a E-maxx 3905 tranny, loads stronger. use mikes.s gearing calculator (google "rc calculations") and one of the first few will have a top speed estimator thing. use that and gear your car for 40mph, that is almost garenteed to keep things cool enuff. i have mine geared for 40mph and my temps are never over 130 on the motor :) running 5s :):whistle: good luck in beefing it up. shaun |
Great thanks Shaun.Is the emaxx tranny a direct bolt in?
|
why do you put e-revo diffs in a revo conversion? are they stronger?
|
Yes, they are stronger.
|
| All times are GMT -4. The time now is 11:47 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.