Eagle Tree Graphs
 

I know there is a thread for posting your setup and runtime but I figured it'd be pretty good to have a thread dedicated to Eaglee Tree or any other data logger graphs and info. Please post as much info on the setup and run as well as the graphs.

I received my EagleTree v3 data logger earlier this week and posted my initial runs under my RC-M RC8T build thread. Tonight I raced with the data logger running. Once again my setup is - A factory Team RC8T kit with the RC-Monster full chassis conversion, running a Mamba Monster esc, Tekno Neu 1515 2.5D, RC-Monster 4500mah 25C 5s lipo, Hitec 7955-TG steering servo, Proline LPR Bow-Ties and 50/15 gearing. Unfortunately I had my temp sensors plugged in backwards so no temps for the run, I will say that the pack was barely warm at the end of the 12min A-main. Here is the voltage and amp draw graph.

http://i548.photobucket.com/albums/i...1/72309RAV.jpg

did you calculate the numbers to see what you are getting for average speed ?

Also had the rpm sensor backwards so I couldn't figure out the average speed

there is always next week.