taboo question....
 

I need a high amp BRUSHED, HV esc for a duel motor project....

it needs
high amp(higher than the evx2)
prograbale to a pistol radio
4s + capable, no cutoff needed
waterproof??:whistle:
under $100

Brushed? MMM...

yes brushed...

MMM can be run in brushed settings quite well.

Used MMM can be had for 100 bucks... Or try a MM. I have had good success with the MM on 2 potent brushed motors.

Neither will be waterproof and the MM will need an external bec to run 4s. So it looks like the MMM is the winner. Plus you have a really good brushless esc too.

MMM is a little too expensive right now...

I have an RX8 in my box that I forgot about:whistle: its going to be a PIA to watterproof it though:no:

any sugestions on a watterproof esc???

I'll let the cat-outa-thebag now, its a duel dewalt motor (mabey^3) muggy:wink:

I see, cause regular single BL motor muggies are way too light, right?

no, I want somthing that I can run in the snow/water:oops: and brushed just cheaper....

$30 for a motor...

I have a Astroflight 212D brushed ESC. Not sure how it can be programmed but if you have mechanical brakes, it would definitely work.